Classe Audio SSP-800 owner manual Specifications, Overall dimensions, Net weight, Shipping weight

Page 64

64

Specifications

All specifications are accurate at the time of printing. Classé reserves the right to make improvements without notice.

Frequency response

20Hz - 200kHz < 0.1dB, stereo analog bypass

Distortion (THD+noise)

20Hz - 20kHz < 0.2dB, all other sources

0.001%, digital source/bypassed analog source

Maximum input level (single-ended)

.002%, processed analog source

2Vrms (DSP), 6Vrms (bypass)

Maximum input level (balanced)

4Vrms (DSP), 12Vrms (bypass)

Maximum output level (single-ended)

8Vrms

Maximum output level (balanced)

15Vrms

Gain Range

 

 

-100dB to +14dB

Input impedance

 

100kΩ

Output impedance (main output)

56Ω

Signal-to-noise ratio (ref. 10Vrms input)

102dB, bypassed analog source

 

 

 

100dB, processed analog source

Channel separation

 

105dB, digital source

 

better than 100dB

Crosstalk (any input to any output)

better than -120dB @ 1kHz

Video input impedance

 

75Ω

Video output impedance

75Ω

HDMI

v.1.3b supporting Deep Color, 1080p @ 24/50/60 fps,

Rated power consumption

and x.v.Color(xvYCC).

75W

Mains voltage determined by the needs of country for which the unit was manufactured; cannot be reset by dealer or user

Overall dimensions

Width: 17.5” (445mm)

 

Depth (excluding connectors) : 16.5” (419mm)

Net weight

Height: 6.75” (172mm)

29 lbs (13 kg)

Shipping weight

38 lbs (17 kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone

+1 (514) 636-6384

FAX

+1 (514) 636-1428

Internet:

http://www.classeaudio.com

email:

cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.

Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS, DTS Digital Surround, ES, and Neo:6 are registered trademarks and the DTS logos, Symbol and DTS 96/24 are trademarks of DTS, Inc.

© 1996-2008 DTS, Inc. All Rights Reserved.

Image 64
Contents SSP-800 Surround Sound Processor Page Important Safety Instructions Contents Configuration Use Video Next input Introduction Welcome to the Classé familyExceptional Design Features Page Unpacking and Placement Unpacking your SSP-800Placement considerations Warm-up/break-in period Operating voltage Voltage protection Menu On/Off Switch Standby/On SwitchFront Panel Volume Control Knob TouchscreenAudio Mute Control IR windowRear Panel Video InputsComponent Video Inputs Composite Video InputsHdmi Inputs Hdmi Outputs Component Video OutputDigital Audio Inputs Coaxial Digital Audio Inputs OpticalDigital Audio Output Coaxial Digital Audio Output Optical11 7.1-Channel Analog Audio Inputs 12 2-Channel Balanced Analog Audio InputsIR Input IR OutputTrigger Outputs USB Port 18 RS-232 PortCAN-Bus Input and Output 20 10-Channel Analog OutputsMain Power On/Off Switch AC Power Cord InputRemote Control Basic FunctionsAudio Processing Functions Input Sel Selection ButtonPreset Config Configuration Button Volume Control & Mute ButtonsNavigation & Menu Buttons Function Keys F1 to F4Step Initial SetupChoose the appropriate cables Connect all source components to the SSP-800 rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Post-processing DTS-HDUsing the SSP-800 Source selectionMode selection Name DescriptionData in the soundtrack Controls System trimsConfiguration select Menu System System setup Volume setupMax volume Startup volume IR setup Automation Mute setup Input setup NameAudio Configuration Use Video Next input TriggersProfiles Room EQ Configuration Name Distances Levels Use SpeakersSpeakers available Auxiliary channels Black level Teach IRDisplay setup Brightness TimeoutLanguage OSD on screen display Colors Volume Dolby/DTS Dolby Pro Logic DTS Neo6Remote Fkeys Important note on Fkey useFeatures Version info SensorsHardware setup Classé Delta Series ProductsCategory 5 Network Cables CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status StatusPlayLink Amp info Event log Everything appears to be powered on, but there is no sound TroubleshootingThere is no sound and the Standby LED is not lit IR remote control does not seem to function Only one speaker seems to be playing There is a hum coming out of the speakers There is a hum coming from the SSP-800Voltage Protection Circuit Care & Maintenance Input factory defaultsSpecifications Overall dimensionsNet weight Shipping weightDimensions Installation Worksheet Page North America 1 800 370 3740 email classe@bwgroupusa.com