Classe Audio SSP-800 Hardware setup, Classé Delta Series Products, Category 5 Network Cables

Page 55

hardware setup

1Classé Delta Series Products

Two or more Classé Delta series products are required, at least one of which must have a touchscreen display.

2Category 5 Network Cables

These are ordinary network cables, commonly used for broadband Internet connections. They should be typical “straight through” cables not the “crossed over” type, and the total required will be one less than the total number of Delta series components in your system.

3CAN-Bus Terminator

At minimum, a single CAN-Bus Terminator will be required. It is inserted into the CAN-Bus OUT connector of the last component in the CAN-Bus daisy chain. One is included in the box with your SSP-800. They are also available free of charge from your nearest Classé Customer Support Centre http://www.Classeaudio.com/support/service.htm

4SSP-300 & 600 CAN-Bus Interface Box

Systems that include an SSP-600 or SSP-300 will also require an SSP-300/600 CAN-Bus Interface Box. These are included with the products or available free of charge from your nearest Classé Customer Support Centre http://www.Classeaudio.com/support/service.htm

The diagrams below illustrate how to connect the CAN-Bus hardware.

Any combination of models in any order without SSP-300 or SSP-600.

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

Any combination of models in any order with SSP-300 or SSP-600.

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

CAN-BUS

IN OUT

NOTE: Daisy chain must be terminated with CAN-Bus Terminator.

55

Image 55
Contents SSP-800 Surround Sound Processor Page Important Safety Instructions Contents Configuration Use Video Next input Welcome to the Classé family IntroductionExceptional Design Features Page Unpacking your SSP-800 Unpacking and PlacementPlacement considerations Warm-up/break-in period Operating voltage Voltage protection Menu On/Off Switch Standby/On SwitchFront Panel IR window Volume Control KnobTouchscreen Audio Mute ControlVideo Inputs Rear PanelComponent Video Inputs Composite Video InputsHdmi Inputs Digital Audio Inputs Optical Hdmi OutputsComponent Video Output Digital Audio Inputs Coaxial12 2-Channel Balanced Analog Audio Inputs Digital Audio Output CoaxialDigital Audio Output Optical 11 7.1-Channel Analog Audio InputsUSB Port 18 RS-232 Port IR InputIR Output Trigger Outputs20 10-Channel Analog Outputs CAN-Bus Input and OutputAC Power Cord Input Main Power On/Off SwitchInput Sel Selection Button Remote ControlBasic Functions Audio Processing FunctionsFunction Keys F1 to F4 Preset Config Configuration ButtonVolume Control & Mute Buttons Navigation & Menu ButtonsStep Initial SetupChoose the appropriate cables Connect all source components to the SSP-800 rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name DTS-HD Post-processingSource selection Using the SSP-800Name Description Mode selectionData in the soundtrack System trims ControlsConfiguration select Menu System Volume setup System setupMax volume Startup volume IR setup Automation Mute setup Name Input setupAudio Configuration Triggers Use Video Next inputProfiles Room EQ Configuration Name Distances Use Speakers LevelsSpeakers available Auxiliary channels Teach IR Black levelBrightness Timeout Display setupLanguage OSD on screen display Colors Volume Dolby Pro Logic DTS Neo6 Dolby/DTSImportant note on Fkey use Remote FkeysVersion info Sensors FeaturesCAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface Box Hardware setupClassé Delta Series Products Category 5 Network CablesUsing CAN-Bus Configuration Operate AC status Status CAN-Bus shared featuresPlayLink Amp info Event log Everything appears to be powered on, but there is no sound TroubleshootingThere is no sound and the Standby LED is not lit There is a hum coming from the SSP-800 IR remote control does not seem to functionOnly one speaker seems to be playing There is a hum coming out of the speakersVoltage Protection Circuit Input factory defaults Care & MaintenanceShipping weight SpecificationsOverall dimensions Net weightDimensions Installation Worksheet Page North America 1 800 370 3740 email classe@bwgroupusa.com