Sharp PN-Y325 operation manual Binding Cables, Setting the USB flash drive cover, 15 E

Page 15

Binding Cables

The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.

Attach the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables.

Cable clamp

attachmentCable

Setting the USB flash drive cover

1. Insert the USB flash drive into the USB port.

2.Attach the USB flash drive cover and secure with the provided screw.

USB flash drive cover screw

USB port

TIPS

•If the USB flash drive will be attached, use a USB flash drive with dimensions no greater than 1-15/16 inch (50 mm) (L) × 13/16 inch (20 mm) (W) × 1/2 inch (12 mm) (H).

15 E

Image 15

Contents PN-Y325 Page Refer Servicing to Qualified Service Personnel Connecting Plug to Mains LeadBlue Neutral Brown Live Dear Sharp Customer Safety Precautions Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsNRear view LCD panel Remote control sensor SeePart Names NFront viewReturn button See SIZE/Yellow button See NRemote control unit Part NamesSignal transmitter 11 EConnecting Peripheral Equipment 13 E Connecting Peripheral EquipmentConnecting the Power Cord USB flash drive cover screw USB port Setting the USB flash drive coverBinding Cables 15 E16.4 Preparing the Remote Control UnitInstalling the batteries Remote control operation range17 E Turning Power On/OffTurning power on/off Turning on the main powerTurning Power On/Off NOperation mode NDate/time settingSetting of the Setup menu. Be sure to set the date and time 19 E Basic OperationBasic Operation NSwitching the screen size Normal WideDot by Dot Playing files Playing the Files in a USB Flash Drive21 E Auto playbackMusic Playing files using the Schedule functionPhoto MovieSettings 23 EOperations during play Size Playing the Files in a USB Flash Drive Settings during playColor Mode VolumeNExample of operation Menu Items25 E Displaying the menu screenNPICTURE Menu item detailsMenu Items NSCREENNSETUP 27 EMenu Items NAUDIO Remote Control Power on DelayScan Mode Hdmiav Adjustment LockMenu Items NEnlarge Setting procedureSet using Multi in the Setup menu 29 EMenu Items NSCHEDULE Schedule Menu Items NScreen display for adjustmentOpening the adjustment pattern 31 EPC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditionsNID Setting 33 ENResponse code format OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← 002VOLM0030 VOLM0020 ←Controlling the Monitor with a PC RS-232C NRepeater control NRepeater control commandVolume settings for all monitors are returned 35 EScreen menu RS-232C command tablePower control/Input mode selection Controlling the Monitor with a PC RS-232CControlling the Monitor with a PC RS-232C Setup menu 37 EOthers Character input Settings to connect to a LANControlling the Monitor with a PC LAN To set on the monitorCommand-based control 39 EControlling the Monitor with a PC LAN Troubleshooting Troubleshooting Power LED is flashing in red and green alternately41 E NProduct Specifications SpecificationsNDimensional Drawings Specifications43 E Specifications NPower management Dmpm Digital Monitor Power ManagementNDDC plug and play DVI-D Hdmi Specifications NCompatible signal timing PCNCompatible signal timing AV 45 ENRS-232C input terminal pins Specifications NDVI-D input terminal pinsNHDMI input terminal pins ND-sub input terminal pinsNDVI-D output terminal pins Specifications NRS-232C output terminal pins47 E Mounting Precautions For Sharp dealers and service engineers PN-Y325 Me EN14G2