Sharp PN-Y325 Preparing the Remote Control Unit, Installing the batteries, 16.4, Feet

Page 16

Preparing the Remote Control Unit

Installing the batteries

1.Press the cover gently and slide it in the direction of the arrow.

2.See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly.

3.Close the cover.

TIPS

When the batteries become exhausted, replace them with new (commercially available) batteries.

The supplied batteries (R-6 (“AA” size) x 2) may become exhausted quickly depending on how they are stored.

If you will not be using the remote control for a long time, remove the batteries.

Use manganese or alkaline batteries only.

Remote control operation range

The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor.

 

Remote

 

control sensor

10°

16.4

 

feet

10°

(5 m)

10°

10°

TIPS

Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.

Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.

Objects between the remote control unit and the remote control sensor may prevent proper operation.

Replace the batteries when they run low as this may shorten the remote control’s operation range.

If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.

Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.

E16

Image 16
Contents PN-Y325 Page Connecting Plug to Mains Lead Refer Servicing to Qualified Service PersonnelBlue Neutral Brown Live Dear Sharp Customer Safety Precautions Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationContents Supplied ComponentsLCD panel Remote control sensor See Part NamesNFront view NRear viewNRemote control unit Part Names Signal transmitter11 E Return button See SIZE/Yellow button SeeConnecting Peripheral Equipment Connecting Peripheral Equipment 13 EConnecting the Power Cord Setting the USB flash drive cover Binding Cables15 E USB flash drive cover screw USB portPreparing the Remote Control Unit Installing the batteriesRemote control operation range 16.4Turning Power On/Off Turning power on/offTurning on the main power 17 ENDate/time setting Turning Power On/Off NOperation modeSetting of the Setup menu. Be sure to set the date and time Basic Operation 19 ENormal Wide Basic Operation NSwitching the screen sizeDot by Dot Playing the Files in a USB Flash Drive 21 EAuto playback Playing filesPlaying files using the Schedule function PhotoMovie Music23 E SettingsOperations during play Playing the Files in a USB Flash Drive Settings during play Color ModeVolume SizeMenu Items 25 EDisplaying the menu screen NExample of operationMenu item details Menu ItemsNSCREEN NPICTURE27 E NSETUPMenu Items NAUDIO Power on Delay Scan Mode HdmiavAdjustment Lock Remote ControlSetting procedure Set using Multi in the Setup menu29 E Menu Items NEnlargeMenu Items NSCHEDULE Menu Items NScreen display for adjustment Opening the adjustment pattern31 E ScheduleCommunication procedure Controlling the Monitor with a PC RS-232CCommunication conditions PC connection33 E NID SettingNResponse code format 002 VOLM0030VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←NRepeater control command Volume settings for all monitors are returned35 E Controlling the Monitor with a PC RS-232C NRepeater controlRS-232C command table Power control/Input mode selectionControlling the Monitor with a PC RS-232C Screen menu37 E Controlling the Monitor with a PC RS-232C Setup menuOthers Settings to connect to a LAN Controlling the Monitor with a PC LANTo set on the monitor Character input39 E Command-based controlControlling the Monitor with a PC LAN Troubleshooting Power LED is flashing in red and green alternately Troubleshooting41 E Specifications NProduct SpecificationsSpecifications NDimensional Drawings43 E Dmpm Digital Monitor Power Management Specifications NPower managementNDDC plug and play Specifications NCompatible signal timing PC NCompatible signal timing AV45 E DVI-D HdmiSpecifications NDVI-D input terminal pins NHDMI input terminal pinsND-sub input terminal pins NRS-232C input terminal pinsSpecifications NRS-232C output terminal pins NDVI-D output terminal pins47 E Mounting Precautions For Sharp dealers and service engineers PN-Y325 Me EN14G2