Sharp PN-Y325 operation manual Basic Operation, 19 E

Page 19

Basic Operation

2

5

6

9

1.INPUT (Input mode selection)

1

3

4

7 8

5. BRIGHT +/- (Brightness adjustment)

Pressing or displays the BRIGHT menu when the menu screen is not displayed.

31

Press or to adjust the brightness.

*If you do not press any buttons for about 30 seconds, the BRIGHT menu automatically disappears.

6.ENTER

Confirms the setting.

7.RETURN

Returns to the previous screen.

8. SIZE (Screen size selection)/Yellow

The menu is displayed. Press or to select the input mode, and press ENTER to enter.

*You can select the input terminal by pressing the input switch of the monitor.

Input mode

Video

Audio

DVI-D

DVI-D input

Audio1 input terminal

terminal

 

 

HDMI[AV]

HDMI input

HDMI input terminal /

HDMI[PC]

terminal

Audio1 input terminal

D-SUB[RGB]

D-sub input

Audio1 input terminal

D-SUB[COMPONENT]

 

terminal

Audio2 input terminals

D-SUB[VIDEO]

 

 

USB

USB port

USB port

When a USB flash drive is connected, the input mode

automatically changes to “USB”. The input mode also automatically changes to “USB” if the power is turned on with

a USB flash drive connected.

2. MUTE

Turns off the volume temporarily.

Press the MUTE button again to turn the sound back to the previous level.

3. MENU

Displays and turns off the menu screen. (see page 25.)

4. VOL +/- (Volume adjustment)

Pressing or displays the VOLUME menu when the menu screen is not displayed.

15

Press or to adjust the volume of the sound.

*If you do not press any buttons for about 5 seconds, the VOLUME menu automatically disappears.

*To change the volume of video or music when the input mode is “USB”, use “Settings during play”. (See page 24.)

Each time you press this button, the screen size changes in the following order: (See page 20.)

NORMAL → WIDE → Dot by Dot →NORMAL...

9. DISPLAY/Red

Displays monitor information (Input mode, LAN Setup, etc.). The display disappears automatically after about 15 seconds.

10. MODE (Color mode selection)/Green

Each time you press this button, the color mode changes in the following order:

STD (Standard) → VIVID → sRGB→

HIGH ILLUMINANCE → USB → STD...

HIGH ILLUMINANCE is a display with colors suited to bright locations.

sRGB is for DVI-D, HDMI[PC], and D-SUB[RGB] input only. sRGB is international standard of color representation specified by IEC (International Electrotechnical

Commission). Color conversion is made in taking account of liquid crystal’s characteristics and represents color tone close to its original image.

Caution

When the input mode is [USB], operations 3, 4, 5, 8, 9, and

10 cannot be performed. Change an input mode to other than USB before performing these operations. COLOR

MODE, VOLUME and SIZE can be changed while a file in a USB flash drive is being played. (See page 24.)

TIPS

8 SIZE , 9 DISPLAY, and 10 MODE are also used when playing a file in a USB flash drive and when entering text. Colors and operation names appear in the screen.

19 E

Image 19
Contents PN-Y325 Page Connecting Plug to Mains Lead Refer Servicing to Qualified Service PersonnelBlue Neutral Brown Live Dear Sharp Customer Safety Precautions Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsNRear view LCD panel Remote control sensor SeePart Names NFront viewReturn button See SIZE/Yellow button See NRemote control unit Part NamesSignal transmitter 11 EConnecting Peripheral Equipment 13 E Connecting Peripheral EquipmentConnecting the Power Cord USB flash drive cover screw USB port Setting the USB flash drive coverBinding Cables 15 E16.4 Preparing the Remote Control UnitInstalling the batteries Remote control operation range17 E Turning Power On/OffTurning power on/off Turning on the main powerNDate/time setting Turning Power On/Off NOperation modeSetting of the Setup menu. Be sure to set the date and time 19 E Basic OperationNormal Wide Basic Operation NSwitching the screen sizeDot by Dot Playing files Playing the Files in a USB Flash Drive21 E Auto playbackMusic Playing files using the Schedule functionPhoto Movie23 E SettingsOperations during play Size Playing the Files in a USB Flash Drive Settings during playColor Mode VolumeNExample of operation Menu Items25 E Displaying the menu screenNPICTURE Menu item detailsMenu Items NSCREEN27 E NSETUPMenu Items NAUDIO Remote Control Power on DelayScan Mode Hdmiav Adjustment LockMenu Items NEnlarge Setting procedureSet using Multi in the Setup menu 29 EMenu Items NSCHEDULE Schedule Menu Items NScreen display for adjustmentOpening the adjustment pattern 31 EPC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditions33 E NID SettingNResponse code format OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← 002VOLM0030 VOLM0020 ←Controlling the Monitor with a PC RS-232C NRepeater control NRepeater control commandVolume settings for all monitors are returned 35 EScreen menu RS-232C command tablePower control/Input mode selection Controlling the Monitor with a PC RS-232C37 E Controlling the Monitor with a PC RS-232C Setup menuOthers Character input Settings to connect to a LANControlling the Monitor with a PC LAN To set on the monitor39 E Command-based controlControlling the Monitor with a PC LAN Troubleshooting Power LED is flashing in red and green alternately Troubleshooting41 E NProduct Specifications SpecificationsSpecifications NDimensional Drawings43 E Dmpm Digital Monitor Power Management Specifications NPower managementNDDC plug and play DVI-D Hdmi Specifications NCompatible signal timing PCNCompatible signal timing AV 45 ENRS-232C input terminal pins Specifications NDVI-D input terminal pinsNHDMI input terminal pins ND-sub input terminal pinsSpecifications NRS-232C output terminal pins NDVI-D output terminal pins47 E Mounting Precautions For Sharp dealers and service engineers PN-Y325 Me EN14G2