Sharp PN-Y325 operation manual Turning Power On/Off NOperation mode, NDate/time setting

Page 18

Turning Power On/Off

nOperation mode

When the monitor is turned on for the first time after being shipped from the factory, the operation mode setting screen will be displayed. Set it to MODE1 or MODE2.

MODE1....OFF IF NO OPERATION is set to ON, and

STANDBY MODE is set to LOW POWER. (These settings can not be changed.)

If there is no operation for 4 hours or more, the monitor automatically enters standby mode. Power consumption in standby mode is also minimized.

MODE2....Will perform standard operation.

OFF IF NO OPERATION is set to OFF, and STANDBY MODE is set to STANDARD. These settings can be changed.

Even after being set, changes can be made using OPERATION MODE, located in the menu of the monitor. (See page 27.)

nDate/time setting

•If the time has not been set, such as when the monitor is first turned on, set the date and time in DATE/TIME

SETTING of the SETUP menu. Be sure to set the date and time.

TIPS

•Set the time on a 24-hour basis.

•The clock stops if the main power remains off for about 1 week.*

(*Approximate time. The actual time varies depending on the state of the monitor.)

E18

Image 18

Contents PN-Y325 Page Refer Servicing to Qualified Service Personnel Connecting Plug to Mains LeadBlue Neutral Brown Live Dear Sharp Customer Safety Precautions Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationContents Supplied ComponentsNFront view LCD panel Remote control sensor SeePart Names NRear view11 E NRemote control unit Part NamesSignal transmitter Return button See SIZE/Yellow button SeeConnecting Peripheral Equipment Connecting Peripheral Equipment 13 EConnecting the Power Cord 15 E Setting the USB flash drive coverBinding Cables USB flash drive cover screw USB portRemote control operation range Preparing the Remote Control UnitInstalling the batteries 16.4Turning on the main power Turning Power On/OffTurning power on/off 17 ETurning Power On/Off NOperation mode NDate/time settingSetting of the Setup menu. Be sure to set the date and time Basic Operation 19 EBasic Operation NSwitching the screen size Normal WideDot by Dot Auto playback Playing the Files in a USB Flash Drive21 E Playing filesMovie Playing files using the Schedule functionPhoto MusicSettings 23 EOperations during play Volume Playing the Files in a USB Flash Drive Settings during playColor Mode SizeDisplaying the menu screen Menu Items25 E NExample of operationNSCREEN Menu item detailsMenu Items NPICTURENSETUP 27 EMenu Items NAUDIO Adjustment Lock Power on DelayScan Mode Hdmiav Remote Control29 E Setting procedureSet using Multi in the Setup menu Menu Items NEnlargeMenu Items NSCHEDULE 31 E Menu Items NScreen display for adjustmentOpening the adjustment pattern ScheduleCommunication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connectionNID Setting 33 ENResponse code format VOLM0020 ← 002VOLM0030 OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←35 E NRepeater control commandVolume settings for all monitors are returned Controlling the Monitor with a PC RS-232C NRepeater controlControlling the Monitor with a PC RS-232C RS-232C command tablePower control/Input mode selection Screen menuControlling the Monitor with a PC RS-232C Setup menu 37 EOthers To set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN Character inputCommand-based control 39 EControlling the Monitor with a PC LAN Troubleshooting Troubleshooting Power LED is flashing in red and green alternately41 E Specifications NProduct SpecificationsNDimensional Drawings Specifications43 E Specifications NPower management Dmpm Digital Monitor Power ManagementNDDC plug and play 45 E Specifications NCompatible signal timing PCNCompatible signal timing AV DVI-D HdmiND-sub input terminal pins Specifications NDVI-D input terminal pinsNHDMI input terminal pins NRS-232C input terminal pinsNDVI-D output terminal pins Specifications NRS-232C output terminal pins47 E Mounting Precautions For Sharp dealers and service engineers PN-Y325 Me EN14G2