Sharp PN-Y325 operation manual Mounting Precautions For Sharp dealers and service engineers

Page 48

Mounting Precautions

(For SHARP dealers and service engineers)

•Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

•This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation.

•This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

•To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the thickness of the mounting bracket.

•Do not use an impact driver.

•When moving the monitor, hold the parts marked by below. Do not hold the LCD panel. This may cause product damage, failure, or injury.

•After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

•Do not use any screw holes other than VESA holes for installation.

E48

Image 48

Contents PN-Y325 Page Refer Servicing to Qualified Service Personnel Connecting Plug to Mains LeadBlue Neutral Brown Live Dear Sharp Customer Safety Precautions Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationContents Supplied ComponentsLCD panel Remote control sensor See Part NamesNFront view NRear viewNRemote control unit Part Names Signal transmitter11 E Return button See SIZE/Yellow button SeeConnecting Peripheral Equipment Connecting Peripheral Equipment 13 EConnecting the Power Cord Setting the USB flash drive cover Binding Cables15 E USB flash drive cover screw USB portPreparing the Remote Control Unit Installing the batteriesRemote control operation range 16.4Turning Power On/Off Turning power on/offTurning on the main power 17 ETurning Power On/Off NOperation mode NDate/time settingSetting of the Setup menu. Be sure to set the date and time Basic Operation 19 EBasic Operation NSwitching the screen size Normal WideDot by Dot Playing the Files in a USB Flash Drive 21 EAuto playback Playing filesPlaying files using the Schedule function PhotoMovie MusicSettings 23 EOperations during play Playing the Files in a USB Flash Drive Settings during play Color ModeVolume SizeMenu Items 25 EDisplaying the menu screen NExample of operationMenu item details Menu ItemsNSCREEN NPICTURENSETUP 27 EMenu Items NAUDIO Power on Delay Scan Mode HdmiavAdjustment Lock Remote ControlSetting procedure Set using Multi in the Setup menu29 E Menu Items NEnlargeMenu Items NSCHEDULE Menu Items NScreen display for adjustment Opening the adjustment pattern31 E ScheduleCommunication procedure Controlling the Monitor with a PC RS-232CCommunication conditions PC connectionNID Setting 33 ENResponse code format 002 VOLM0030VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←NRepeater control command Volume settings for all monitors are returned35 E Controlling the Monitor with a PC RS-232C NRepeater controlRS-232C command table Power control/Input mode selectionControlling the Monitor with a PC RS-232C Screen menuControlling the Monitor with a PC RS-232C Setup menu 37 EOthers Settings to connect to a LAN Controlling the Monitor with a PC LANTo set on the monitor Character inputCommand-based control 39 EControlling the Monitor with a PC LAN Troubleshooting Troubleshooting Power LED is flashing in red and green alternately41 E Specifications NProduct SpecificationsNDimensional Drawings Specifications43 E Specifications NPower management Dmpm Digital Monitor Power ManagementNDDC plug and play Specifications NCompatible signal timing PC NCompatible signal timing AV45 E DVI-D HdmiSpecifications NDVI-D input terminal pins NHDMI input terminal pinsND-sub input terminal pins NRS-232C input terminal pinsNDVI-D output terminal pins Specifications NRS-232C output terminal pins47 E Mounting Precautions For Sharp dealers and service engineers PN-Y325 Me EN14G2