Sharp PN-Y325 operation manual 13 E, Connecting Peripheral Equipment

Connecting Peripheral Equipment

5. Audio1 input terminal

•Use an audio cable without resistance.

6. Audio2 input terminals

7. DVI-D output terminal

•When the input mode is set to DVI-D, the video of the

DVI-D input can be output to an external device.

•Outputting HDCP-encrypted video requires an external device which supports HDCP.

•This terminal allows the daisy chain connection of up to 5 monitors by connecting the monitors to each other through the DVI-D input terminal of each monitor.

TIPS

•The length of the signal cables or surrounding environment may affect the image quality.

•When the input mode is set to a mode other than DVI-D, video cannot be output.

8.Audio output terminals

•The output sound varies depending on the input mode.

•It is not possible to control the sound output from the audio output terminals with the AUDIO menu. Set this function with AUDIO OPTION in the SETUP menu. (See page 27.)

9.RS-232C input terminal 10. RS-232C output terminal

• You can control the monitor from a PC by connecting a commercially available RS-232 straight cable between these terminals and the PC.

• PN-Y325 monitors can be connected together in a daisy chain connection.

11. LAN terminal

•You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network.

13 E