Specifications
nProduct Specifications
Model |
|
| ||
LCD component |
|
| 32" Class | |
Max. resolution |
| (pixels) | 1920 x 1080 | |
Max. colors |
|
| Approx. 16.77 million colors | |
Pixel pitch |
|
| 0.364 mm (H) × 0.364 mm (V) | |
Viewing angle |
|
| 178° right/left/up/down (contrast ratio ≥ 10) | |
Screen active area |
| inch (mm) | ||
Computer input signal |
| Digital (DVI 1.0 | ||
Sync signal |
|
| Horizontal/vertical separate (TTL: positive/negative) | |
Video color system |
|
| NTSC (3.58MHz)/NTSC | |
Plug and play |
|
| VESA DDC2B | |
Power management |
|
| VESA DPMS, DVI DMPM | |
Input terminals |
| PC/AV |
| HDMI x 1 |
|
| PC |
| Mini |
|
|
|
| |
|
| Audio |
| 3.5 mm mini stereo jack x 1 |
|
|
|
| RCA pin (L/R) x 1 |
|
| Serial |
| |
|
| USB flash drive |
| x 1 |
Output terminals |
| PC |
| |
|
| Audio |
| RCA pin (L/R) x 1 |
|
| Serial |
| |
LAN terminal |
|
|
| 10 |
Speaker output |
|
| 5 W + 5 W | |
Power requirement |
|
| AC 100 - 240 V, 1.1 A, 50/60 Hz | |
Operating temperature *1 |
| 32°F to 104°F (0°C to 40°C) | ||
Operating humidity |
|
| 20% to 80% (no condensation) | |
Power consumption |
|
| 56 W (11 W / 11 W) | |
(Input signal waiting mode / standby mode *2) |
| |||
Dimensions (excluding protrusions) | inch (mm) | Approx. | ||
Weight |
| lbs. (kg) | Approx. 17.7 (8.0) |
*1 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments.
*2 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
E42