Sharp PN-Y325 operation manual Menu item details, Menu Items, Nscreen, Npicture

Page 26

Menu Items

Menu item details

The menu will differ depending on the input mode.

nSCREEN

AUTO (D-SUB[RGB])

The H/V-POS, etc. are automatically adjusted.

H/V-POS

Adjust the horizontal and vertical position of the image.

SIZE

Changes the screen size. The screen size can also be changed using a remote control unit. (See page 19.)

ZOOM (HDMI[AV]/D-SUB[COMPONENT]/D-SUB[VIDEO])

Enlarge and display part of the image.

INPUT SIGNAL (D-SUB[RGB])

If a computer connected to the D-SUB output any of the following resolution, make a selection from the following options.

768	1024x768, 1280x768, 1360x768 or 1366x768

RESET

Resets the values of the SCREEN menu items to the factory preset values.

Select “ON” and then press ENTER.

nPICTURE

BRIGHT

Adjusts the backlight brightness.

CONTRAST

Adjusts the difference between the bright and dark portions of the image.

BLACK LEVEL

Adjusts the entire brightness of the video signals.

TINT

Adjusts the hue. Selecting - changes the color towards magenta, and selecting + changes it towards green.

COLORS

Adjusts the color intensity.

SHARPNESS (HDMI[AV]/D-SUB[COMPONENT]/D-SUB[VIDEO])

Adjusts the sharpness of the image.

COLOR ADJUSTMENT

COLOR MODE

Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See page 19.)

* sRGB is DVI-D, HDMI[PC], D-SUB[RGB] input only. See page 19 for details.

WHITE BALANCE

THRU	Displays the input signal level as is.
PRESET	Selects the color temperature using PRESET.
USER	Used for adjusting R-/G-/B-GAIN and R-/G-/B-OFFSET respectively.

PRESET

Selects the color temperature when the WHITE BALANCE is set to PRESET.

The setting values are shown for reference. The color temperature of the screen varies over time. This function is not intended to keep the color temperature constant.

GAMMA

Selects the gamma.

ADVANCED

NOISE REDUCTION (HDMI[AV]/D-SUB[COMPONENT]/D-SUB[VIDEO])

Reduce the noise of playback images.

HDMI RGB INPUT RANGE (HDMI[PC]/HDMI[AV])

Sets the RGB input signal range.

RESET

Resets the values of the PICTURE menu items to the factory preset values.

Select “ON” and then press ENTER.

E26

Image 26

Contents PN-Y325 Page Blue Neutral Brown Live Refer Servicing to Qualified Service PersonnelConnecting Plug to Mains Lead Dear Sharp Customer Safety Precautions Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationContents Supplied ComponentsNFront view LCD panel Remote control sensor SeePart Names NRear view11 E NRemote control unit Part NamesSignal transmitter Return button See SIZE/Yellow button SeeConnecting Peripheral Equipment Connecting Peripheral Equipment 13 EConnecting the Power Cord 15 E Setting the USB flash drive coverBinding Cables USB flash drive cover screw USB portRemote control operation range Preparing the Remote Control UnitInstalling the batteries 16.4Turning on the main power Turning Power On/OffTurning power on/off 17 ESetting of the Setup menu. Be sure to set the date and time Turning Power On/Off NOperation modeNDate/time setting Basic Operation 19 EDot by Dot Basic Operation NSwitching the screen sizeNormal Wide Auto playback Playing the Files in a USB Flash Drive21 E Playing filesMovie Playing files using the Schedule functionPhoto MusicOperations during play Settings23 E Volume Playing the Files in a USB Flash Drive Settings during playColor Mode SizeDisplaying the menu screen Menu Items25 E NExample of operationNSCREEN Menu item detailsMenu Items NPICTUREMenu Items NAUDIO NSETUP27 E Adjustment Lock Power on DelayScan Mode Hdmiav Remote Control29 E Setting procedureSet using Multi in the Setup menu Menu Items NEnlargeMenu Items NSCHEDULE 31 E Menu Items NScreen display for adjustmentOpening the adjustment pattern ScheduleCommunication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connectionNResponse code format NID Setting33 E VOLM0020 ← 002VOLM0030 OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←35 E NRepeater control commandVolume settings for all monitors are returned Controlling the Monitor with a PC RS-232C NRepeater controlControlling the Monitor with a PC RS-232C RS-232C command tablePower control/Input mode selection Screen menuOthers Controlling the Monitor with a PC RS-232C Setup menu37 E To set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN Character inputControlling the Monitor with a PC LAN Command-based control39 E Troubleshooting 41 E TroubleshootingPower LED is flashing in red and green alternately Specifications NProduct Specifications43 E NDimensional DrawingsSpecifications NDDC plug and play Specifications NPower managementDmpm Digital Monitor Power Management 45 E Specifications NCompatible signal timing PCNCompatible signal timing AV DVI-D HdmiND-sub input terminal pins Specifications NDVI-D input terminal pinsNHDMI input terminal pins NRS-232C input terminal pins47 E NDVI-D output terminal pinsSpecifications NRS-232C output terminal pins Mounting Precautions For Sharp dealers and service engineers PN-Y325 Me EN14G2