Sharp PN-Y325 operation manual 27 E, Menu Items NAUDIO, Nsetup

Page 27

Menu Items

nAUDIO

BASS

Adjusts the volume of bass-level sound.

TREBLE

Adjusts the volume of treble-level sound.

RESET

Resets the values of the AUDIO menu items to the factory preset values.

Select “ON” and then press ENTER.

nSETUP

DATE/TIME SETTING

Set the date and time. Press or to select the date and time, and press or to change the numerical values. Set the time on a 24-hour basis.

SCHEDULE (See page 30.)

You can turn the power on/off at a specified time.

Files in a USB flash drive can also be played at a specified time.

LANGUAGE

Sets the display language for the menu screen.

INPUT SELECT

HDMI

Select the input mode to be used in HDMI input terminals.

D-SUB

Select the input mode to be used in D-Sub input terminal. Select SET after selecting the input mode, and then press ENTER.

AUDIO OPTION

AUDIO OUTPUT

Sets the volume of sound output from the audio output terminals.

SPEAKER

Select whether or not speakers are used.

LAN Setup

Configures the settings to control the monitor from the computer via LAN. (See page 38.)

ID SETTING

Assigns ID numbers to monitors connected in a daisy chain (see page 33), using the RS-232 cables. The numbers 0 to 25 are available for ID numbers.

If “0” is set, the system regards this as the state where no ID number is set.

MULTI

ENLARGE (See page 29.)

Sets whether or not to use the enlarge function.

ADVANCED (ENLARGE)

ENLARGE H / ENLARGE V

..........Sets the number of screen splits (number of monitors) in the horizontal/vertical direction used for the enlargement.

ENLARGE-POS

..........Specify the split screen to be displayed when the enlargement function is used. (See page 29.)

BEZEL ADJUST

..........When ENLARGE is set to ON, sets whether or not to use the frame correction function.

THERMAL SENSOR SETTING

Select the installation direction of the monitor.

LANDSCAPE

Landscape orientation

PORTRAIT

Portrait orientation

OPERATION MODE

 

MODE1

OFF IF NO OPERATION is set to ON, and STANDBY MODE is set to LOW POWER.

 

(These settings can not be changed.)

MODE2

Will perform standard operation. OFF IF NO OPERATION is set to OFF, and STANDBY MODE is set to

 

STANDARD. These settings can be changed.

STANDBY MODE

When STANDARD is selected, startup time from standby mode is reduced. Note, however that, more power will be consumed in standby mode. When LOW POWER is selected, current consumption is reduced while the monitor is in standby mode. Note, however, that the startup time from standby mode becomes longer.

If set to LOW POWER, RS-232C commands cannot be used in standby mode and control via LAN is disabled. (See page 32, 38.) When set to LOW POWER, the monitor enters power standby mode rather than input signal standby mode when there is no input signal, and therefore the monitor does not wake up when a signal is input. (See page 17.)

27 E

Page 26 Page 28
Image 27
Page 26 Page 28
Contents PN-Y325 Page Refer Servicing to Qualified Service Personnel Connecting Plug to Mains LeadBlue Neutral Brown Live Dear Sharp Customer Safety Precautions Safety Precautions Tips and Safety Instructions For the monitor in portrait orientation For the monitor in landscape orientationSupplied Components ContentsNRear view LCD panel Remote control sensor SeePart Names NFront viewReturn button See SIZE/Yellow button See NRemote control unit Part NamesSignal transmitter 11 EConnecting Peripheral Equipment 13 E Connecting Peripheral EquipmentConnecting the Power Cord USB flash drive cover screw USB port Setting the USB flash drive coverBinding Cables 15 E16.4 Preparing the Remote Control UnitInstalling the batteries Remote control operation range17 E Turning Power On/OffTurning power on/off Turning on the main powerTurning Power On/Off NOperation mode NDate/time settingSetting of the Setup menu. Be sure to set the date and time 19 E Basic OperationBasic Operation NSwitching the screen size Normal WideDot by Dot Playing files Playing the Files in a USB Flash Drive21 E Auto playbackMusic Playing files using the Schedule functionPhoto MovieSettings 23 EOperations during play Size Playing the Files in a USB Flash Drive Settings during playColor Mode VolumeNExample of operation Menu Items25 E Displaying the menu screenNPICTURE Menu item detailsMenu Items NSCREENNSETUP 27 EMenu Items NAUDIO Remote Control Power on DelayScan Mode Hdmiav Adjustment LockMenu Items NEnlarge Setting procedureSet using Multi in the Setup menu 29 EMenu Items NSCHEDULE Schedule Menu Items NScreen display for adjustmentOpening the adjustment pattern 31 EPC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditionsNID Setting 33 ENResponse code format OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← 002VOLM0030 VOLM0020 ←Controlling the Monitor with a PC RS-232C NRepeater control NRepeater control commandVolume settings for all monitors are returned 35 EScreen menu RS-232C command tablePower control/Input mode selection Controlling the Monitor with a PC RS-232CControlling the Monitor with a PC RS-232C Setup menu 37 EOthers Character input Settings to connect to a LANControlling the Monitor with a PC LAN To set on the monitorCommand-based control 39 EControlling the Monitor with a PC LAN Troubleshooting Troubleshooting Power LED is flashing in red and green alternately41 E NProduct Specifications SpecificationsNDimensional Drawings Specifications43 E Specifications NPower management Dmpm Digital Monitor Power ManagementNDDC plug and play DVI-D Hdmi Specifications NCompatible signal timing PCNCompatible signal timing AV 45 ENRS-232C input terminal pins Specifications NDVI-D input terminal pinsNHDMI input terminal pins ND-sub input terminal pinsNDVI-D output terminal pins Specifications NRS-232C output terminal pins47 E Mounting Precautions For Sharp dealers and service engineers PN-Y325 Me EN14G2
Top Page Image Contents