Kenwood TM-V71A, TM-V71E instruction manual Transmitter, Receiver

Transmitter

TM-V71A	TM-V71E	TM-V71A
K Type	E Type	M4 Type

RF power	Hi	50 W	—
	Mid	Approx. 10 W	25W
output
	Low	Approx. 5 W
Modulation		Reactance modulation
Maximum frequency deviation		Within ±5 kHz
Spurious radiation		Less than –60 dB
Modulation distortion		Less than 3%
(300 Hz ~ 3 kHz)
Microphone impedance		600 Ω

Receiver

TM-V71A	TM-V71E	TM-V71A
K Type	E Type	M4 Type

Circuitry		Double super heterodyne
Intermediate	1st (Band A/ Band B)	45.05 MHz/ 49.95 MHz
frequency	2nd (Band A/ Band B)	455 kHz/ 450 kHz
Sensitivity		Less than 0.16 µV
Squelch sensitivity		Less than 0.1 µV
Selectivity	–6 dB	More than 11 kHz
	–50 dB	Less than 30 kHz
Low frequency output (8 Ω)		More than 2 W (at 5% distortion)

Concerning the received frequency display, an unmodulated signal may be received. This is according to the set intrinsic frequency form.

		<A band>		<B band>
VxU reception	(144 MHz + 45.05 MHz) x 2		–	(430 MHz - 49.95 MHz)	= 45.05 MHz, 49.95 MHz
	(144	MHz + 45.05 MHz) x 4	– (430 MHz - 49.95 MHz) x 2		= 45.05 MHz, 49.95 MHz
UxV reception	(430 MHz - 45.05 MHz)		– (144 MHz + 49.95 MHz) x 2		=	45.05 MHz, 49.95 MHz
	(430	MHz - 45.05 MHz) x 2	–	(144 MHz + 49.95 MHz) x 4	=	45.05 MHz, 49.95 MHz

97