Kenwood TM-V71A, TM-V71E Clearing a Memory Channel, Naming a Memory Channel, Press MR + Power on

Clearing a Memory Channel

1Press [MR] to enter Memory Recall mode.

2Rotate the Tuning control to select your desired Memory channel.

•Additionally, you can press the microphone [UP]/[DWN] keys to select a channel, or you can enter a channel number using the microphone keypad.

3Turn the transceiver power OFF.

4Press [MR] + Power ON.

•A confirmation message appears on the display.

5Press the Tuning control to clear the Memory channel.

•To exit without clearing the channel, press [F] (ESC).

Naming a Memory Channel

You can name Memory channels using up to 6 alphanumeric characters. When you recall a named Memory channel, its name appears on the display instead of the stored frequency. Names can be call signs, repeater names, cities, people, etc.

1Press [MR] to enter Memory Recall mode.

2Rotate the Tuning control to select your desired Memory channel.

3Enter Menu mode and access Menu 200 (M.NAME) {page 20}.

4Enter your desired name for the channel {page 24}.

Note: You can overwrite a Memory channel name by performing the steps above. You can also clear a Memory channel name by clearing the Memory channel.

35