Kenwood TM-V71A, TM-V71E Group Scan, Memory Group Link, Memory Group Channel Range

GROUP SCAN

For the purpose of Group Scan, the 1000 Memory channels are divided into 10 groups, with each group containing 100 channels. Group Scan monitors only the 100 channels which belong to the specific group you are scanning. The channels are grouped as follows:

Memory Group	Channel Range	Memory Group	Channel Range
0	0 ~ 99	5	500 ~ 599
1	100 ~ 199	6	600 ~ 699
2	200 ~ 299	7	700 ~ 799
3	300 ~ 399	8	800 ~ 899
4	400 ~ 499	9	900 ~ 999

1Press [MR], then rotate the Tuning control to select a channel in your desired group.

2Press the Tuning control (1s).

•Scan starts at the current channel.

•The 1 MHz decimal blinks while scanning is in progress.

•To reverse the scan direction, turn the Tuning control clockwise (upward scan) or counterclockwise (downward scan). You can also press microphone [UP]/ [DWN].

3To quit Group Scan, press the Tuning control again.

Note:

uAt least 2 Memory channels in the selected group must contain data and must not be locked out of scan.

uYou can also start Memory Scan when in Channel Display mode. While Scan is paused on a channel, the channel number blinks.

nMemory Group Link

Memory Group Link provides you with the ability to link 2 or more Memory channel groups together to act as a single group when scanning. You can link up to 6 separate groups together, or even add multiple instances of the same group to the group link, to ensure that one group is scanned more often than the other groups.

1 Enter Menu mode and access Menu 203 (GR.LINK) {page 20}. 2 Press the Tuning control.

•The cursor will begin blinking.

45