Kenwood TM-V71E, TM-V71A instruction manual Transmitting EchoLink Memory

nTransmitting EchoLink Memory

1 Select the band and frequency of the node to which you want to connect.

2 Press and hold the microphone [PTT].

3 While transmitting, press the Tuning control.

•The last called EchoLink DTMF Memory channel name and number appears on the display.

4While still transmitting, rotate the Tuning control to select your desired EchoLink Memory channel, then press the Tuning control to set the channel.

•The stored code scrolls across the display and is transmitted.

•The code will be transmitted even if you release [PTT] before the entire code has scrolled across the display.

•When only a name has been stored, the DTMF code for that name appears on the display. The Call Sign code is automatically preceeded with a “C” and ends with a “#”. DTMF values are listed in the following table:

	1	2	3	4	5	6	7	8	9	0
0	1	2	3	4	5	6	7	8	9	0
1	Q	A	D	G	J	M	P	T	W
2	Z	B	E	H	K	N	R	U	X
3		C	F	I	L	O	S	V	Y

So, for example, if the Call Sign being transmitted was JA1YKX, the display would read: C 51 21 10 93 52 92 #

However, if characters other than letters or numbers are used (such as a hypen of a space), only the DTMF code for characters before that non-regular character are displayed. All subsequent characters will not appear on the display.

• If no data is stored in the selected channel, the frequency display is restored.

60