Built-in CD Player
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of each track on the CD.
1Use
2Press
on.
The first 10 seconds of each track is played.
3When you find the desired track press
The track will continue to play.
# If the display has automatically returned to the playback display, select Scan mode again by using
Note
After scanning of a CD is finished, normal play- back of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the CD.
1Use
Pause appears in the display.
2Press
on.
Playback of the current track pauses.
# To turn pause off, press
Black plate (21,1)
|
|
| Section |
|
|
| 05 |
|
|
| English |
Selecting the search method |
You can switch the search method between fast forward/reverse and searching every 10 tracks.
1Use
2Press
Press
!FF/REV – Fast forward and reverse
!Rough search – Searching every 10 tracks
Searching every 10 tracks in the current disc
If a disc contains over 10 tracks, you can search every 10 tracks. When a disc contains many tracks, you can roughly search for the track you want to play.
1Select the search method Rough search. Refer to Selecting the search method on this page.
2Push and hold
right to search every 10 tracks on a disc.
# If a disc contains less than 10 tracks, pushing and holding
En 21