Pioneer DEH-P9850BT operation manual Using the high pass filter, Muting the speaker units filters

Page 75

Audio Adjustments

1Use MULTI-CONTROL to select Subwoofer3.

Subwoofer3 appears in the display.

# When the subwoofer output is on, you can se- lect Subwoofer3.

2Push MULTI-CONTROL up or down to select the phase of subwoofer output. Push MULTI-CONTROL up to select normal phase and appears in the display. Push MULTI-CONTROL down to select reverse phase and appears in the display.

3Push MULTI-CONTROL left or right to select slope.

Each time MULTI-CONTROL is pushed left or right, slopes are selected in the following order:

–18— –12— –6 (dB/oct.)

Note

When slope of subwoofer and high pass filter are

–12dB, and same cut-off frequency, the phase is reversed 180 degrees at the cut-off frequency. In this case, reversing the phase assures improved sound continuity.

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers.

Muting the speaker units (filters)

You can mute front and rear speaker units (fil- ters) separately. When speaker units (filters) are muted, no sound is outputted from those speakers.

 

Black plate (75,1)

 

 

 

 

 

 

 

 

 

 

 

 

Section

 

 

 

13

 

 

 

 

 

 

 

!

 

 

English

If you mute the selected speaker unit (fil-

 

 

 

 

ter), MUTE ON is displayed and no adjust-

 

 

 

 

ments are possible.

 

 

 

! Even if any speaker unit (filter) is muted, you can adjust the parameters for other speaker units (filters).

1Use MULTI-CONTROL to select Front HPF (or Rear HPF).

Front HPF (or Rear HPF) appears in the dis- play.

2Push and hold MULTI-CONTROL down to mute the selected speaker unit (filter).

MUTE ON is displayed.

# To cancel the muting, push MULTI-CONTROL up.

Setting the high pass filter for front speakers

1Use MULTI-CONTROL to select Front HPF.

Front HPF appears in the display.

2Push MULTI-CONTROL left or right to select slope.

Each time MULTI-CONTROL is pushed left or right, slopes are selected in the following order:

–12— –6—Pass (0) (dB/oct.)

# If you set the slope to 0 dB/oct. (Pass), the audio signal bypasses the filter, so the filter does not have an effect.

3Turn MULTI-CONTROL to select

Front HPF FREQ.

Front HPF FREQ. appears in the display.

4Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order:

En 75

<CRB2179-A/N>75

Page 74 Page 76
Image 75
Page 74 Page 76
Contents DEH-P9850BT Thank you for buying this Pioneer product ContentsReading jacket arts Multi-CD Player Playing a CD Adjusting source levels Operating environment FeaturesBefore You Start About this unit About this manualAbout AAC About BluetoothBefore You Start About WMAResetting the microprocessor Clearing all memoryProtecting your unit from theft Attaching the front panel About the demo modeReverse mode Removing the front panelUsing the remote control Use and care of the remote controlFeature demo mode Installing the batteryAudio button operation Remote control What’s WhatHead unit Ak e j Basic Operations Turning the unit on Selecting a sourceLoading a disc Adjusting the volume Basic OperationsTurning the unit off Tuner Listening to the radio Storing the strongest broadcast frequencies Tuner Introduction of advanced tuner operationStoring and recalling Broadcast frequenciesSelecting stations from the preset channel list Tuning in strong signalsTuner Selecting a track directly Built-in CD Player Playing a CDPlaying tracks in random order Repeating playSearching every 10 tracks in the current disc Pausing CD playbackBuilt-in CD Player Scanning tracks of a CD Selecting the search methodUsing disc title functions Built-in CD PlayerEntering disc titles Selecting tracks from the track title list Using CD Text functionsDisplaying disc titles Displaying text information on CD Text discs06 MP3/WMA/AAC/WAV Player Playing MP3/WMA/AAC WAV files Selecting a track directly in the current folder MP3/WMA/AAC/WAV PlayerCRB2179-A/N26 Searching every 10 tracks in the current folder Pausing MP3/WMA/AACScanning folders and tracks WAV playbackDisplaying text information on MP3/WMA/AAC/WAV disc When playing back a WAV discWhen playing back an MP3/ WMA/AAC disc 06 MP3/WMA/AAC/WAV PlayerReading jacket arts Selecting tracks from the file name listDisplaying jacket arts on CD-ROM discsSelecting folders with jacket arts 12 3 About the telephone source Bluetooth TelephoneSetting up for hands-free phoning Standby modeMaking a phone call Bluetooth Telephone Basic operation of hands- free phoningAnswering an incoming call Taking a phone callConnecting a cellular phone Searching for available cellular phones Using a cellular phone to initiate a connectionDisconnecting a cellular phone Registering connected cellular phoneDeleting a registered phone Connecting to a registered cellular phone Connecting to a registered phone manuallyConnecting to a registered phone automatically Transferring entries to the Phone Book Using the Phone BookChanging the Phone Book display order Calling a number in the Phone BookAssign genres to phone numbers Editing the name of a Phone Book entry Selecting the icon of a Phone Book entry Editing phone numbersUsing preset numbers Clearing memoryClearing a Phone Book entry Displaying the Call History Using the Call HistoryAssigning preset numbers Making a call by entering phone numberCalling a number from the Call History Changing the ring tone Echo canceling and noise reductionSelecting the icon for user Bluetooth Telephone Setting the automatic rejectingSetting the automatic answering Displaying BD Bluetooth Device addressDisplaying system version for repair Displaying BD address of your cellular phoneDisplaying BD address of this unit Setting up for Bluetooth audio player Connecting a Bluetooth audio player Bluetooth AudioStopping playback Bluetooth Audio Function operationPlaying songs on Bluetooth audio player Pausing a songDisplaying BD address of this unit Disconnecting a Bluetooth audio playerMulti-CD Player Playing a CD Multi-CD Player Disc multi-CD playerIntroduction of advanced multi-CD player operation Scanning CDs and tracks Using ITS playlists Creating a playlist with ITS programmingPlayback from your ITS playlist Erasing a CD from your ITS playlist Erasing a track from your ITS playlistSelecting discs from the disc title list Black plate 59,1 Browsing for a song Playing songs on iPod Listening to songs on your iPodSelecting a playlist Playing songs on iPodDisplaying text information on iPod Searching for a songPlaying songs in a random order shuffle Playing songs on iPod Pausing a song MULTI-CONTROL left or right TV tuner Watching the televisionTV tuner Introduction of advanced TV tuner operation Storing and recalling broadcast stationsStoring the strongest broadcast stations sequentially TV tuner DVD Player Playing a disc Selecting a discSelecting a folder DVD Player Introduction of advanced DVD player operation Pausing disc playback Using ITS playlist and disc title functionsDVD Player CRB2179-A/N70 Extra functions Audio Adjustments Adjusting the audio easilyAdjusting the audio finely AdjustmentsAudio Adjustments Using the position selectorUsing balance adjustment Adjusting the time alignment Using the time alignmentUsing subwoofer output Adjusting subwoofer settingsAdjusting low pass filter attenuation slope Using the high pass filter Setting the high pass filter for front speakersMuting the speaker units filters Recalling equalizer curves Using the auto-equalizerUsing the equalizer Setting the high pass filter for rear speakersAdjusting 16-band graphic equalizer Adjusting equalizer curvesUsing compression and BMX Using BBE soundAdjusting loudness Adjusting source levelsUsing auditory user interface Before operating the auto TA and EQ function Carrying out auto TA and EQ CRB2179-A/N82 Initial Settings Adjusting initial settings Setting the dateSelecting the display language Setting the AM tuning step Initial SettingsSetting the clock Setting the FM tuning stepSwitching the dimmer setting Switching the warning toneSwitching the face auto open Switching the auxiliary settingSwitching the sound muting/attenuation Switching the feature demoCorrecting distorted sound Activating the BT Audio source Initial Settings Switching the reverse modeSwitching the Ever Scroll Calibrating the RPMsResetting the Bluetooth wireless technology module Entering PIN code for Bluetooth wireless connectionAbout AUX1 and AUX2 Using the AUX sourceSetting the AUX title Other Functions Turning the clock display on or offUsing different entertainment displays Setting the entertainment displayOther Functions Entertainment Setting the background displayOn rewriting the entertainment displays on CRB2179-A/N92 Message Cause Action Understanding auto TA EQ error messagesCD-R/CD-RW discs CD player and careAdditional Information Dual DiscsMP3, WMA, AAC and WAV files MP3 additional information WMA additional informationAAC additional information WAV additional information About folders and MP3/ WMA/AAC/WAV filesCRB2179-A/N98 A2DP Additional Information Terms100 En General Additional Information Specifications102 En CRB2179-A/N103 Pioneer Corporation
Top Page Image Contents