Built-in CD Player
Displaying disc titles
You can display the text information of any disc that has had a disc title entered.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between the following settings:
: disc
Using CD TEXT functions
Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artist’s name and playback time and are called CD TEXT discs. Only these spe- cially encoded CD TEXT discs support the functions listed below.
Displaying text information on CD TEXT discs
You can display the text information of any disc that has had a disc title entered.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between the following settings:
: disc
track artist
#If specific information has not been recorded on a CD TEXT disc, title or name is not displayed.
Black plate (23,1)
Section
05
than 24 letters, you can scroll the text informa- | English |
| |
tion as follows. |
|
!When the source icon is turned off, this unit can display the first 30 letters of text in- formation.
%Press DISPLAY and hold until the text information begins to scroll through the display.
The titles scroll.
Note
When Ever Scroll is set to ON at the initial setting, text information scrolls continuously in the dis- play. Refer to Switching the Ever Scroll on page 87.
Selecting tracks from the track title list
Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back.
1Press LIST to switch to the track title list mode.
2Use
Turn to change the track title; press to play.
# You can also change the track title by pushing
# If you do not operate the list within about 30
seconds, the track title list mode is canceled automatically.
Scrolling text information in the display
This unit can display the first 24 letters of disc title, disc artist name, track title and track ar- tist name. When the text information is longer
En 23