Audio Adjustments
Display | Equalizer curve |
|
|
Powerful | Powerful |
|
|
Natural | Natural |
|
|
Vocal | Vocal |
|
|
Flat | Flat |
|
|
Custom1 | Custom 1 |
|
|
Custom2 | Custom 2 |
|
|
Super Bass | Super bass |
|
|
!Custom1 and Custom2 are adjusted equal- izer curves that you create. Adjustments can be made with a
!When Flat is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.
%Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol- lowing equalizers:
Adjusting equalizer curves
The factory supplied equalizer curves, with the exception of Flat, can be adjusted to a fine de- gree (nuance control).
1Use
Powerful appears in the display.
# If the equalizer curve has been previously se- lected, the curve of that previously selected will be displayed instead of Powerful.
Black plate (77,1)
Section
13
2 Push | English |
| |
select an equalizer curve. |
|
Each time |
|
right, equalizer curves are selected in the fol- |
|
lowing order: |
|
| |
| |
3 Push |
|
adjust the equalizer curve. |
|
Each time |
|
down, the equalizer curve increases or de- |
|
creases respectively. |
|
+6 to |
|
increased or decreased. |
|
# The actual range of the adjustments are differ- |
|
ent depending on which equalizer curve is se- |
|
lected. |
|
# The equalizer curve with all frequencies set to |
|
0 cannot be adjusted. |
|
Adjusting 16-band graphic equalizer
For Custom1 and Custom2 equalizer curves, you can adjust the level of each band.
!A separate Custom1 curve can be created for each source. (The
!A Custom2 curve can be created common to all sources. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated.
1Recall the equalizer curve you want to adjust.
See Recalling equalizer curves on the previous page.
En 77