Initial Settings
2Press
Pressing
10kHz. The selected AM tuning step will ap- pear in the display.
Switching the warning tone
If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.
1Use
Warning tone appears in the display.
2Press
ON appears in the display.
# To turn warning tone off, press
Switching the face auto open
For theft protection, the front panel opens automatically and easily detaches. Face auto open is on as a default.
1Use
Face auto open appears in the display.
2Press
ON appears in the display.
# To turn the face auto open off, press
Black plate (85,1)
|
|
| Section |
|
|
| 14 |
|
|
| English |
Switching the auxiliary setting |
Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 89.
1Use
AUX1/AUX2 appears in the display.
2Press
ON appears in the display.
# To turn AUX off, press
Switching the dimmer setting
To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.
1Use
2Press
on.
ON appears in the display.
# To turn dimmer off, press
Adjusting the brightness
You can adjust the display brightness. Initially this mode is set to 24.
1Use
Brightness appears in the display.
En 85