Pioneer DEH-P9850BT operation manual Using subwoofer output, Adjusting subwoofer settings

Page 74

Black plate (74,1)

Section

13 Audio Adjustments

Front speaker left—Front speaker right—Rear speaker right—Rear speaker left—Subwoofer left—Subwoofer right

#You cannot select subwoofer left and subwoo- fer right when the subwoofer output is off.

5Push MULTI-CONTROL up or down to adjust the distance between the selected speaker and the listening position.

Each time MULTI-CONTROL is pushed up or down, the distance increases or decreases. 400.00cm to 0.00cm is displayed as the dis- tance is increased or decreased, if you have selected centimeters (cm).

160.0inch to 0.0inch is displayed as the dis- tance is increased or decreased, if you have

selected inches (inch).

# You can adjust the distance for the other speakers in the same way.

6Press BAND to cancel the time align- ment mode.

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off. When a sub- woofer is connected to this unit, turn the sub- woofer output on.

The subwoofer output phase can be switched between normal and reverse.

1Use MULTI-CONTROL to select Subwoofer1.

Subwoofer1 appears in the display.

2Press MULTI-CONTROL to turn subwoo- fer output on.

ON appears in the display. Subwoofer output

is now on.

# To turn subwoofer output off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to select stereo or monaural.

Push MULTI-CONTROL left to select monaural and MONO appears in the display. Push MULTI-CONTROL right to select stereo and STEREO appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can ad- just the cut-off frequency and the output level of the subwoofer.

1Use MULTI-CONTROL to select Subwoofer2.

Subwoofer2 appears in the display.

# When the subwoofer output is on, you can se- lect Subwoofer2.

2Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order:

50—63—80—100—125—160—200 (Hz) Only frequencies lower than those in the se- lected range are outputted from the subwoo- fer.

3Push MULTI-CONTROL up or down to adjust the output level of the subwoofer. Each time MULTI-CONTROL is pushed up or down, subwoofer level increases or decreases. +6 to –24 is displayed as the level is increased or decreased.

Adjusting low pass filter attenuation slope

When the subwoofer output is on, you can ad- just the continuity of sound between speaker units.

74 En

<CRB2179-A/N>74

Image 74
Contents DEH-P9850BT Contents Thank you for buying this Pioneer productReading jacket arts Multi-CD Player Playing a CD Adjusting source levels About this manual FeaturesBefore You Start About this unit Operating environmentAbout WMA About BluetoothBefore You Start About AACProtecting your unit from theft Resetting the microprocessorClearing all memory Removing the front panel About the demo modeReverse mode Attaching the front panelInstalling the battery Use and care of the remote controlFeature demo mode Using the remote controlAudio button operation Head unit Remote controlWhat’s What Ak e j Loading a disc Basic Operations Turning the unit onSelecting a source Turning the unit off Adjusting the volumeBasic Operations Tuner Listening to the radio Broadcast frequencies Tuner Introduction of advanced tuner operationStoring and recalling Storing the strongest broadcast frequenciesTuner Selecting stations from the preset channel listTuning in strong signals Built-in CD Player Playing a CD Selecting a track directlyRepeating play Playing tracks in random orderSelecting the search method Pausing CD playbackBuilt-in CD Player Scanning tracks of a CD Searching every 10 tracks in the current discEntering disc titles Using disc title functionsBuilt-in CD Player Displaying text information on CD Text discs Using CD Text functionsDisplaying disc titles Selecting tracks from the track title list06 MP3/WMA/AAC/WAV Player Playing MP3/WMA/AAC WAV files MP3/WMA/AAC/WAV Player Selecting a track directly in the current folderCRB2179-A/N26 WAV playback Pausing MP3/WMA/AACScanning folders and tracks Searching every 10 tracks in the current folder06 MP3/WMA/AAC/WAV Player When playing back a WAV discWhen playing back an MP3/ WMA/AAC disc Displaying text information on MP3/WMA/AAC/WAV discCD-ROM discs Selecting tracks from the file name listDisplaying jacket arts on Reading jacket artsSelecting folders with jacket arts 12 3 Standby mode Bluetooth TelephoneSetting up for hands-free phoning About the telephone sourceBluetooth Telephone Basic operation of hands- free phoning Making a phone callTaking a phone call Answering an incoming callConnecting a cellular phone Using a cellular phone to initiate a connection Searching for available cellular phonesDeleting a registered phone Disconnecting a cellular phoneRegistering connected cellular phone Connecting to a registered phone automatically Connecting to a registered cellular phoneConnecting to a registered phone manually Using the Phone Book Transferring entries to the Phone BookAssign genres to phone numbers Changing the Phone Book display orderCalling a number in the Phone Book Editing the name of a Phone Book entry Editing phone numbers Selecting the icon of a Phone Book entryClearing a Phone Book entry Using preset numbersClearing memory Using the Call History Displaying the Call HistoryCalling a number from the Call History Assigning preset numbersMaking a call by entering phone number Echo canceling and noise reduction Changing the ring toneDisplaying BD Bluetooth Device address Bluetooth Telephone Setting the automatic rejectingSetting the automatic answering Selecting the icon for userDisplaying BD address of this unit Displaying system version for repairDisplaying BD address of your cellular phone Setting up for Bluetooth audio player Bluetooth Audio Connecting a Bluetooth audio playerPausing a song Bluetooth Audio Function operationPlaying songs on Bluetooth audio player Stopping playbackDisconnecting a Bluetooth audio player Displaying BD address of this unitMulti-CD Player Playing a CD Introduction of advanced multi-CD player operation Multi-CD PlayerDisc multi-CD player Scanning CDs and tracks Playback from your ITS playlist Using ITS playlistsCreating a playlist with ITS programming Erasing a track from your ITS playlist Erasing a CD from your ITS playlistSelecting discs from the disc title list Black plate 59,1 Playing songs on iPod Listening to songs on your iPod Browsing for a songSearching for a song Playing songs on iPodDisplaying text information on iPod Selecting a playlistPlaying songs in a random order shuffle Playing songs on iPod Pausing a song TV tuner Watching the television MULTI-CONTROL left or rightStoring the strongest broadcast stations sequentially TV tuner Introduction of advanced TV tuner operationStoring and recalling broadcast stations TV tuner Selecting a folder DVD Player Playing a discSelecting a disc DVD Player Introduction of advanced DVD player operation DVD Player Pausing disc playbackUsing ITS playlist and disc title functions CRB2179-A/N70 Adjustments Audio Adjustments Adjusting the audio easilyAdjusting the audio finely Extra functionsUsing balance adjustment Audio AdjustmentsUsing the position selector Using the time alignment Adjusting the time alignmentAdjusting low pass filter attenuation slope Using subwoofer outputAdjusting subwoofer settings Muting the speaker units filters Using the high pass filterSetting the high pass filter for front speakers Setting the high pass filter for rear speakers Using the auto-equalizerUsing the equalizer Recalling equalizer curvesAdjusting equalizer curves Adjusting 16-band graphic equalizerUsing BBE sound Using compression and BMXUsing auditory user interface Adjusting loudnessAdjusting source levels Before operating the auto TA and EQ function Carrying out auto TA and EQ CRB2179-A/N82 Selecting the display language Initial Settings Adjusting initial settingsSetting the date Setting the FM tuning step Initial SettingsSetting the clock Setting the AM tuning stepSwitching the auxiliary setting Switching the warning toneSwitching the face auto open Switching the dimmer settingCorrecting distorted sound Switching the sound muting/attenuationSwitching the feature demo Calibrating the RPMs Initial Settings Switching the reverse modeSwitching the Ever Scroll Activating the BT Audio sourceEntering PIN code for Bluetooth wireless connection Resetting the Bluetooth wireless technology moduleOther Functions Turning the clock display on or off Using the AUX sourceSetting the AUX title About AUX1 and AUX2Other Functions Using different entertainment displaysSetting the entertainment display Setting the background display EntertainmentOn rewriting the entertainment displays on CRB2179-A/N92 Understanding auto TA EQ error messages Message Cause ActionCD player and care CD-R/CD-RW discsMP3, WMA, AAC and WAV files Additional InformationDual Discs AAC additional information MP3 additional informationWMA additional information About folders and MP3/ WMA/AAC/WAV files WAV additional informationCRB2179-A/N98 Additional Information Terms A2DP100 En Additional Information Specifications General102 En CRB2179-A/N103 Pioneer Corporation