Pioneer DEH-2150UB owner manual Initial Settings, Adjusting loudness, Adjusting source levels

	Black plate (15,1)
	Section
Operating this unit	02

1Use MULTI-CONTROL to select TONE CTRL in the audio function menu.

2Press MULTI-CONTROL to display the setting mode.

3Press MULTI-CONTROL to select BASS/

MID/TREBLE.

4Turn MULTI-CONTROL to adjust the level.

+6 to –6 is displayed as the level is increased or decreased.

5Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been cancelled before determination, operation is settled.

1Compare the FM volume level with the level of the source you wish to adjust.

2Use MULTI-CONTROL to select SLA in the audio function menu.

3Press MULTI-CONTROL to display the setting mode.

4Turn MULTI-CONTROL to adjust the source volume.

+4 to –4 is displayed as the source volume is increased or decreased.

5Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been cancelled before determination, operation is settled.

English

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Use MULTI-CONTROL to select LOUDNESS in the audio function menu.

2Press MULTI-CONTROL to display the setting mode.

3Turn MULTI-CONTROL to select the de- sired setting.

LOW (low)—HIGH (high)—OFF (off)

4Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been cancelled before determination, operation is settled.

Adjusting source levels

Source level adjustment (SLA) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.

!Settings are based on the FM volume level, which remains unchanged.

!The AM volume level can also be adjusted with source level adjustments.

Initial Settings

Adjusting initial settings

1Press SRC/OFF and hold until the unit turns off.

2Press MULTI-CONTROL and hold until CLOCK SET appears in the display.

3Turn MULTI-CONTROL to select one of the initial settings.

CLOCK SET (clock)—FM STEP (FM tuning step)—AM STEP (AM tuning step)—AUX

(auxiliary input)

# To return to the previous display, press

DISP/BACK/SCRL.

# To return to the main menu, press and hold

DISP/BACK/SCRL.

# To cancel initial settings, press BAND/ESC.

Setting the clock

Use these instructions to set the clock.

1Use MULTI-CONTROL to select CLOCK SET in the initial setting menu. Refer to Adjusting initial settings on this page.

En 15

<YRD5220-B/S>15