Pioneer DEH-2150UB Storing and recalling broadcast frequencies, Tuning in strong signals

	Black plate (9,1)
	Section
Operating this unit	02

%Seek tuning

Press and hold c or d, and then release.

#You can cancel seek tuning by briefly pressing c or d.

#While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you release c or d.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast fre- quencies for later recall.

!Six stations for each band can be stored in memory.

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

Memorized radio station frequency can be re-

called by pressing the preset tuning button.

# You can also recall radio station frequencies assigned to preset tuning numbers by pressing a or b during the frequency display.

!To return to the ordinary display, press BAND/ESC.

!If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display.

Storing the strongest broadcast frequencies

BSM (best stations memory) automatically stores the six strongest broadcast frequencies in the order of their signal strength.

1Use MULTI-CONTROL to select BSM in the function menu.

2Press MULTI-CONTROL to turn BSM on.

# To cancel, press MULTI-CONTROL again.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Use MULTI-CONTROL to select LOCAL in the function menu.

English

Introduction to advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to se- lect.

3Turn MULTI-CONTROL to select the function.

BSM (best stations memory)—LOCAL (local seek tuning)

Notes

!To return to the previous display, press DISP/BACK/SCRL.

!To return to the main menu, press and hold DISP/BACK/SCRL.

2Press MULTI-CONTROL to display the setting mode.

3Turn MULTI-CONTROL to select the de- sired setting.

FM: OFF—LEVEL 1—LEVEL 2—LEVEL 3—

LEVEL 4

AM: OFF—LEVEL 1—LEVEL 2

The LEVEL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

4Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been cancelled before determination, operation is settled.

En 9

<YRD5220-B/S>9