VM9413
CONTROLS AND INDICATORS
11. (down joystick)
DVD/Disc Mode: Press once for slow forward/slow reverse.
TUNER Mode: Press to go down one frequency step.
MENU Mode: Press once to move the cursor down.
12. Reset
Press to reset system settings to factory default (except the password and parental lock setting).
13. Pause/Play/Enter
Press to pause or resume playback or to confirm current selection.
14. (right joystick)
DVD/Disc Mode: Press once to enter the next chapter or track.
TUNER Mode: Press once to
MENU Mode: Press once to move the cursor to the right.
15. (up joystick)
DVD/Disc Mode: Press once for fast forward/fast reverse.
TUNER Mode: Press to go up one frequency step.
MENU Mode: Press once to move the cursor up.
16.
Press once for disc insertion/ejection.
Press and hold to reset core mechanism position.
17.TFT Display
18.NAV
1 | 2 | 7 | 4 | 3 |
CLOSE | DISP | Multimedia Receiver | BAND | AS |
17
| 24 |
| 23 |
| 22 |
ANGLE / TILT | PICTURE |
When the NAV102 is connected to the head unit, press to display the navigation user interface. The TFT screen must be open for this function to operate.
19. RPT
Press to control repeat playback function.
20. INT
Press to control intro playback function.
21. SD Card Slot
Insert SD card for playback of audio/video files.
Press Audio
VM9413
5
NAV INT
16
Enter
15
14
13
22. WIDE/PICTURE
Press to adjust the display aspect of the picture to one of two settings: CINEMA, NORMAL or Standby (screen off). NOTE: Only CINEMA and Standby are available for
Press and hold to adjust Brightness and Contrast.
9 | 6 | 8 | 18 | 20 | 19 | 21 | 10 | 11 | 12 |
23/24. ANGLE/TILT
Press to activate the tilt function. Press once to adjust the downward tilt angle of the screen one step at a time or press and hold to adjust the angle in a continuous motion up or down.
4