Tuner Operation

VM9213

Tuner TFT Display

8 17 1 4 5 10 23

		FM-1		P1 87.5 MHz			01:02 PM
	RADIO	FM-1		P1 87.5 MHz
			ST	LOC				9
								9
E	P1	87.5	MHz					20
Q	P1	87.5	MHz					20
	P2	90.1	MHz
	P3	98.1	MHz					14
	P3	98.1	MHz
	P4	106.1	MHz				PS	12
							PS	12
	P5	107.9	MHz
								13
	P6	102.9	MHz
						BAND	AS MEM	18
	6		7	11	19	15	16

1.Current radio band indicator

2.Radio frequency indicator

3.Clock

4.Stereo reception indicator

5.Tuning mode indicator (local/distant)

6.Preset radio stations: Touch to recall preset stations

7.No information in Tuner mode

8.Touch for quick access to Equalizer level settings

9.Touch to access the direct entry screen

10.Preset station indicator

11.<<: Touch to seek backward

12.>>: Touch to seek forward

13.<<: Touch to tune backward one step

14.>>: Touch to tune forward one step

15.BAND: Touch to change between AM/FM bands

16.AS: Touch to automatically store stations

17.Touch to view the SOURCE MENU and select a new playback source

18.MEM: View screen used to enter current channel into preset memory

19.PS (Preview Scan): Touch to scan all stations available, stopping for 5 seconds at each and continuing until a station is selected

20.View setup menu.

Switch to Radio Tuner source

•Touch the top left corner of the screen (the RADIO circle) to view the SOURCE MENU. Touch “Radio”.

•Press the SRC button (6) on the front panel or remote control (8) to switch to the AM/FM source.

Select FM/AM Band

Touch the BAND button (15) on the screen, or press the BAND button on the unit (3) or remote control (30) to change between the following bands: FM1, FM2, FM3, AM1, and AM2.

NOTE: The BAND button on the unit only works when the TFT is closed.

Seek Tuning

To seek the next station:

•Touch the >> button on screen (12).

•Press the >> button (19) on remote control.

To seek the previous station:

•Touch the << button on screen (11).

•Press the << button (17) on the remote control.

Manual Tuning

To increase or decrease the tuning frequency one step:

•Touch the or buttons on screen (14, 13).

•Press the >> or << buttons (14, 22) on the remote control.

Direct Tuning

To enter a radio station directly, touch the button (9) or press the GOTO button (21) on the remote control to display the direct entry menu.

FM: _ _ _ . _ MHz

1 2 3

Exit 4 5 6

7 8 9

0 Clear

Enter the desired radio station using the on-screen number pad. Press the enter button (arrow) to tune to the selected station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear.

Using Preset Stations

Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen.

Storing a Station

1.Select a band (if needed), then select a station.

2.Touch the on-screen MEM button (18) to open the preset screen.

Preset: _

P1 P2 P3

P4 P5 P6

E x i t

3.Touch the preset number in which you would like to store the current station (or touch Exit to cancel and close the menu). The preset number and station appears highlighted.

AS (Auto Store)

Touch the on-screen AS button (16) to automatically store six strong stations as presets for the band currently in use.

Local/Distance

Press and hold the rotary encoder (5) while in tuner mode to change the Local/Distance radio reception mode. The “LOC” icon (5) on the top of the LCD is illuminated when the Local option is selected.