Bluetooth Operation, About Bluetooth

VM9213

BLUETOOTH OPERATION

About Bluetooth

Bluetooth is a short-range wireless radio connectivity technology that is developed as a cable replacement for mobile phones, handheld PCs and other devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Audiovox Corporation is under license. Other trademarks and trade names are those of their respective owners.

NOTE: The line-of-sight distance between this unit and your cellular phone must be 8 meters or less for sending and receiving voice and data via Bluetooth wireless technology. However, the transmission distance may become shorter than the estimated distance, depending on the environment in use.

Before attempting to use the Bluetooth functions on the VM9213, you must purchase and install the BTM10. When connected properly, the blue light appears illuminated. Bluetooth features are only available when the BTM10 is installed.

Please make sure your mobile phone supports Bluetooth functions (Headset or Handsfree profiles or both). Adhere to the following guidelines for successful operation.

•Before using Bluetooth functions, you must pair your mobile phone to the VM9213 head unit (see “Pairing the Bluetooth System with Your Mobile Phone and Head Unit”). To ensure the best reception for pairing and re- connection, please make sure the phone battery is fully charged before you begin.

•Try to perform pairing within a few minutes of the phone being turned on.

•Once the unit has been paired with the phone, the unit’s model number, “VM9213”, will be displayed on the mobile phone.

•To achieve the best performance, always keep the mobile phone within 3 meters of the head unit.

•Always keep a clear path between the mobile phone and the head unit. Never place a metal object or any other obstacle between the mobile phone and the head unit.

•Some mobile phones (like Sony Ericsson) may have a "Power Saving Mode" option. PLEASE DO NOT use the power saving mode with the VM9213.

•Before accepting or making a call, make sure your mobile phone's “Bluetooth function” is turned on.

•To ensure the best conversation quality/performance, stay within one meter of the BTM10 when talking.

•To “disconnect” the mobile phone from the head unit, turn the Bluetooth connectivity off on the mobile phone or touch the button.

•Phone Book direct searching through the head unit is only available if the mobile phone supports Phone Book Download. If the feature is not supported, the head unit will display “Phone book not provided by this phone” when an attempt is made to download a phone book.

Bluetooth User Interface

The on-screen indicators and touch key areas for Bluetooth operation are outlined below.

14 151162

	BT		Disconnected	01:02 AM
			Disconnected

E	1	Missed Calls
Q
	2	Received Calls
	3	Dialed Calls		MENU
	3	Dialed Calls
	4	Phone Book
		Menu List
3		4	19

17	13
	8	20
MENU	8	MENU
9	7	23
10	5	21
	5

11	6	12	22	9	18	7
PHONE INTERFACE			MUSIC INTERFACE

1.Current connection status/device connected

2.Current time

3.Bluetooth menu

4.Current operation status

5.Toggle Music/Phone menu

6.Transfer active call back to handset

7.Pair your Bluetooth phone (first time use)

8.Exit call listing display

9.Connect/disconnect Bluetooth device (phone, PDA, personal music player, etc.) with hand-free function

10.Mute/un-mute microphone during active call

11.Answer incoming call/make call

12.Reject incoming call/end call/quit pairing process/quit reading phone book or call listing

13.Touch to view the SETUP menu

14.Touch to view the equalizer

15.Touch to view the SOURCE MENU and select a new playback source

16.Status indicators (phone mode, music mode, mic mute)

17.Touch to access the direct entry screen

18. : Touch to stop A2DP playback

19.Touch the scroll bar and arrows to view the previous/ next page of choices (only visible when needed)

20.Toggle Music/Phone menu/mode

21.Play/Pause selected file

22.<<: Touch to move to the previous file

23.>>: Touch to move to the next file

Hands Free Profile (HFP)

To use a phone wirelessly with this unit, it is necessary to first establish a connection using Bluetooth wireless technology. Connection is normally established using HFP (Hands Free Profile), which gives you full control of functions available on

VM9213