Display example for numeric keypad
Operation buttons of this area can be used while displaying the numeric keypad input screen. Input screen area
Closes numeric keypad input screen All input numbers will be deleted Previous number will be deleted Input number is confirmed Numeric keypad
The numeric keypad input screen closes when the area is touched while displayed.
3 Touch [ENT] to confirm your entry.
Dual-Screen Display
The connected AMP
1 Touch [VISUAL] on the main source screen.
The VISUAL selection screen appears.
To make the setting, set to “Setting the VISUAL Touch Button” (page 34).
2 Touch [DUAL SCREEN].
The main source screen is restored showing the dual- screen display.
Display example for the
Changes the AMP display for the connected amplifier.
3 Touch [VISUAL] to cancel the
The VISUAL selection screen appears.
4 Touch [NORMAL].
The normal screen will be restored.
Radio
Display example for Radio main screen
[SOURCE] button: Refer to page 12
[VISUAL] button: Displays the VISUAL selection screen
[SETUP] button: Displays the SETUP selection screen
[
] button: Refer to page 13 Displays the preset number/frequency.
Listening to the Radio
1 Touch [SOURCE] on the main source screen. The source selection screen is displayed.
2 Touch [RADIO].
The radio mode is activated and the display changes to the Radio Mode screen.
3 Touch [BAND] to select the desired radio band.
Each press changes the bands as follows:
AM 
4 Touch [TUNE] to choose the tuning mode.
Each touch changes the tuning mode display.
Distance 
Local 
Manual 
Distance
•There are two modes you can select for auto tuning, DX and Local:
-DX (Distance) mode (with DX SEEK indicator ON); Both strong and weak stations will be tuned in.
-Local mode (with SEEK indicator ON); Only strong stations will be tuned in. The initial setting is DX.
5 Touch [
], [
] or [
], [
] to change the radio frequency up or down respectively.
When the button is touched and held, the frequency changes continuously until the button is released.
When a stereo FM station is tuned in, the STEREO indicator appears in the display.