Alpine IVA-D310 Auxiliary Device Optional, Changer Optional, Operating Auxiliary Devices Optional

Page 56

Auxiliary Device (Optional)

Operating Auxiliary Devices (Optional)

To operate your devices connected to the AUX terminals on the rear panel of IVA-D310, follow the procedure described below.

WARNING

It is dangerous (and illegal in many states) for the driver to watch the TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.

Install the IVA-D310 correctly so that the driver cannot watch TV/Video unless the vehicle is stopped and the emergency brake is applied.

If the IVA-D310 is not installed correctly, the driver will be able to watch the TV/Video while driving the vehicle and may be distracted from looking ahead and cause an accident. The driver or other people could be severely injured.

To activate your auxiliary devices:

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1Bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2Keep pushing the foot brake and release the parking brake once then engage it again.

3When the parking brake is engaged for the second time, release the foot brake.

•For automatic transmission vehicles, place the transmission lever in the Park position.

Now, the locking system for the AUX mode operation has been released. Engaging the parking brake can reactivate the AUX mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To activate your auxiliary devices.”

Each time the ignition is turned OFF, perform the procedure of “To activate your auxiliary devices.”

•If you try to activate the auxiliary device while driving, the display will show the warning-PICTURE OFF FOR YOUR SAFETY.

1Touch [SOURCE] on the main source screen. The source screen appears on the display.

2Touch [AUX]*.

The external input screen is displayed.

*AUX-1 to AUX-3 are displayed if the external input devices (maximal 3) are connected, or the name which is given as the source name in “Naming External Devices” on page 34 is displayed.

•If the AUX mode is not displayed on the main menu, set AUX IN to ON by following “Setting the AUX Mode” (page 34).

•The display mode changes by touching [WIDE].

For operation, refer to “Switching Display Modes” on page 25.

Changer (Optional)

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to the IVA-D310 if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the IVA-D310, the CD Changer will be controllable from the IVA-D310.

If you connect a changer compatible with MP3, you can play CD- ROMs, CD-Rs, and CD-RWs containing MP3 files on the IVA-D310.

Using the KCA-410C (Versatile Link Terminal) multiple changers can be controlled by the IVA-D310.

See the Multi-Changer Selection section for selecting the CD Changers (explained on page 55).

1 Touch [SOURCE] on the main source screen.

2 Touch [CD CHG].

The display changes to the CD changer mode screen.

When a 6 Disc CD Changer is connected;

1Touch [P1/2]*.

The Function Guide display appears.

*When an MP3 compatible CD changer or DVD changer is connected, touch repeatedly until the disc number is displayed.

2Touch any one of the select buttons [DISC 1] through [DISC 6].

DISC 1 through DISC 6 select the discs from the first disc to 6th disc.

When an MP3 compatible CD changer is connected;

1Touch [P1/3] twice to change the Function Guide display.

2Touch any one of the select buttons [DISC 1] through [DISC 6].

DISC 1 through DISC 6 select the discs from the first disc to 6th disc.

When a 12-Disc CD Changer is connected;

You can select the disc numbers 1 to 6 in the same manner as for 6-disc Changer.

Touch [P1/3] twice to select disc numbers 7 to 12. The function guide display changes so that DISC 7 through DISC 12 represent disc numbers 7 to 12.

•After selecting the desired disc, you can operate in the same way as for the CD player. For details, see the CD/MP3/WMA section.

•When an MP3 compatible CD changer is connected, the unit can play discs containing both audio data and MP3 data.

•The DVD changer (optional) is controllable from the IVA-D310 as well as the CD changer.

54-EN

Page 55 Page 57
Image 56
Page 55 Page 57
Contents IVA-D310 CHA-S634 CHA-1214CHM-S630Contents Operating Instructions Monitor Setting Navigation System Optional Installation Connections Operating Instructions Maintenance Mark logo Recorded Disc size Max DiscVideo PicturesALL Disc terminology Getting Started Location of ControlsDetaching and Attaching the Front Panel 10-ENTurning Power On or Off Adjusting the Monitor Viewing AngleInitial System Start-Up Opening/Closing the MonitorAdjusting the Volume Lowering Volume QuicklyHow to view the Display Moving the Monitor to be FlatTouch a desired setup menu Shortcut ScreenDisplaying the Numeric Keypad Input Screen 13-ENRadio Listening to the RadioDual-Screen Display 14-ENManual Storing of Station Presets Automatic Memory of Station PresetsTuning to Preset Stations 15-ENPlayback Repeat PlayX. Random Play Selecting Folders concerning MP3/ WMAAbout MP3/WMA 17-ENDVD/Video CD Playing DVD/Video CD18-EN TerminologyTo display the DVD mode screen If a menu screen appears19-EN Direct Menu Operations DVD onlyTurning the PBC Function on or OFF Video CD only Stopping Playback PRE StopStopping Playback Fast-forwarding/Fast-reversingPlaying Still Frames Pausing Finding the Beginnings of Chapters or TracksChapter/Track/Title Repeat Playback Forward/reverse frame-by-frame PlaybackSwitching the Audio Tracks Switching the Angle DVD onlySearching Directly by Chapter or Track Number 22-ENOther Useful Features Adjusting the AudioSwitching from the disc menu 23-ENTouch on the function guide while in the CD or MP3/WMA mode Internal CD player modeSearch Function 24-ENSwitching Display Modes Switching the function of the remote sensorRear Entertainment Function 25-ENSwitching the Visual Source Only Simultaneous Function Blackout Mode On and OffSetting Visualizer Setting the Visual EffectMonitor Setting SetupMonitor Setting Operation DVD Setup OperationSetting of the Menu Language Setting of the Audio LanguageSetting of the Subtitle Language Changing the Country Code SettingSetting the Rating Level Parental Lock Changing the Digital Output SettingTouch the input screen to enter a new 4-digit password 29-ENWindows 30-EN32kbps~320kbps General Setup Operation Setting the Downmix ModeSetting the TV Screen Setting Touch of General SetupSetting the Time Setting Daylight Saving TimeSetting the Scroll Setting the Sound Quality of the TunerSystem Setup Operation Setting the External Device Interrupt ModeSetting the Interrupt Icon Display Setting the Navigation ModeSetting the Visualizer Mode Display Setting the AUX ModeAdjusting the External Input Audio Level Setting of the External Monitor OutputDisplay Setup Operation Setting the Digital OutputSetting the Brightness of the Backlighting Touch of Display SetupAdjusting the Minimum Level of Backlight Switching Background TexturesSetting Automatic Background Textures Setting the Font TypeSetting the MX mode Setting the Bass EnginePersonalize 37-EN38-EN Selecting Bass Max EQ mode Maker’s settingAdjusting and Storing/Recalling the Parametric EQ 39-EN Adjustment and Storing/Recalling of Time CorrectionAbout the Time Correction 40-EN Adjusting and Storing/Recalling the Bass FocusSetting item Bass Focus Setting contents Adjustment and Storing/Recalling of the Built-in Crossover 41-ENVisual EQ Setting Operation Subwoofer On and OffAdjusting Picture Quality Data DownloadingStoring Visual EQ 43-ENAMP Link Lock Function 44-ENAdjustment Procedure for Dolby Surround 45-ENSetting the Speakers Set MX Mode of the External Audio ProcessorOver Adjustment 46-ENAdjust the crossover to your preference Adjusting Level/Cut-off Frequency DirectlyCheck that Defeat mode is off Performing Time Correction Manually TCR48-EN Phase SwitchingGraphic Equalizer Adjustments Parametric Equalizer Adjustments 49-ENSetting Bass Sound Control Speaker SetupSetting Bass Compressor Setting Bass FocusSetting of Dolby 5.1ch Adjusting the DVD LevelStoring Settings in the Memory Getting out the Preset MemoryUsing the Pro Logic II Mode 52-ENLinear PCM Setting Switching the Navigation Screen OptionalNavigation System Optional 53-ENAuxiliary Device Optional Changer OptionalOperating Auxiliary Devices Optional Controlling CD Changer OptionalHDD Player Operation Optional Multi-Changer Selection OptionalListening to Music of HDD 55-ENTuning in to Categorized Programs SAT Radio Receiver OptionalReceiving Channels with the SAT Receiver Optional Changing the DisplayStoring Channel Presets Receiving Stored ChannelsDisplaying the Category/Channel Name Title List Selecting the Channel directlyIPod Optional Searching for a desired SongSearching by Playlist Searching by artist nameAbout Subdisplay Indications About Subdisplay IndicationsRandom Play Shuffle M.I.X 59-EN60-EN Remote ControlControls on Remote Control When Using the Remote Control 61-ENBattery Replacement InformationAbout DVDs 62-ENTerminology 63-ENFor details, see List of Language Codes64-EN List of Country Codes 65-EN66-EN Case of Difficulty 67-EN68-EN Indication for CD changer 69-ENIndication for DVD/Video CD Indication for SAT Receiver Mode 70-ENSpecifications 71-ENChassis Size Monitor section Chassis Size Tuner sectionInstallation and Connections 72-ENInstallation Installing the Monitor Installation LocationTo install using the vehicle’s standard bracket 73-ENInstalling the Tuner Box When mounting with Velcro fastenersInstalling the DC/DC Converter 74-ENConnection Diagram of Spst Switch Sold Separately If the ACC power supply is not available75-EN Parking Brake Lead ConnectionConnections IVA-D310 Wiring Diagram 76-EN77-EN System Example 78-ENDigital Output Terminal Ai-NET Connector To Ai-NET Connector Gray To Ai-NET Connector Black79-EN AUX Video Input AUX1 Terminal80-EN To Ai-NET Connector Black To Ai-NET Connector Gray 81-EN
Top Page Image Contents