Indication for DVD/Video CD
•No disc is inserted.
-Insert a disc.
•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.
-Remove the disc by following these steps: Press 
for at least 3 seconds.
•Remote control operation is not possible.
-For some discs or playing modes, certain operations are not possible. This is not a malfunction.
•Protective circuit is activated to high temperature.
-The indicator will disappear when the temperature returns to within operation range.
-Leave the power OFF until the temperature decreases and then turn the power ON again.
•Disc does not match regional code number.
-Load a disc that matches the regional code number.
•PAL disc is loaded.
-Load an NTSC disc
•Mechanism error.
1)Press 
and eject the disc.
If not ejecting, consult your Alpine dealer.
2)When the error indication remains after ejecting, press 
again.
If the error indication still does not turn off after pressing 
for a few times, consult your Alpine dealer.
•Scratched disc, contaminated disc/poor recording/disc incompatible with this unit.
- Press 
.
- Change the disc.
STOP OR EJECT DISC
BEFORE USING DVD-SETUP
•The DVD setup operation was attempted while playback of a disc is not stopped.
-Stop playback of the disc or eject the disc before the DVD setup operation.
Indication for CD changer
•Protective circuit is activated due to high temperature.
-The indicator will disappear when the temperature returns to within operation range.
•Malfunction in the CD Changer.
-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine dealer.
•Magazine ejection not possible.
-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.
•A disc is left inside the CD Changer.
-Press the Eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.
•No magazine is loaded into the CD Changer.
-Insert a magazine.
•No indicated disc.
-Choose another disc.