Playback
1 Touch [SOURCE] on the main source screen.
The source selection screen is displayed.
2 Touch [DVD PLAYER].
The display shows the DVD player mode screen.
When a CD/MP3/WMA is inserted into the DISC SLOT of the
3 Touch [ 
] or [ 
] to select the desired track (file).
Returning to the beginning of the current track (file):
Touch [ 
].
Fast backward :
Touch and hold [ 
].
Advancing to the beginning of the next track (file) :
Touch [ 
].
Fast forward :
Touch and hold [ 
].
To pause playback
Touch [ 
/ 
].
Touching [ 
/ 
] again will resume playback.
To eject the disc
Press 
.
•The
For further information about playing or storing MP3/WMA files, refer to pages 17 and 18 before using the unit.
•A WMA format file that is protected by DRM (Digital Rights Management) cannot be played back on this unit.
•The unit can play discs containing both audio data and MP3/WMA data.
•The MP3/WMA indicator is lit during MP3/WMA playback.
•The track display for CD audio data playback is the track numbers recorded on the disc.
•
•“Playing MP3/WMA Data” is mentioned on page 32 “GENERAL Setup.”
•When an MP3/WMA disc is played, it sometimes takes a few moment until it starts.
•Touch [ 
] to activate the search mode. For operations, refer to “Search Function” on page 24.
However, the search mode function does not work in the CD changer mode.
•The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.
•If about 15 seconds passes without removing the disc after pressing
, the disc is automatically inserted into the unit. In this case, start playback by touching [ 
/ 
] since the unit has been paused.
Repeat Play
Touch [
] to play back repeatedly the track currently being played.
The track (file) will be played repeatedly.
Touch [
] again and select OFF to deactivate Repeat play.
<Monitor display>
CD: RPT 
RPT DISC*1 
(off) 
RPT
MP3/WMA:
1Touch [P1/2]*3 to change the function guide.
2Touch [
] and select the desired Repeat play.
<Monitor display>
RPT 
RPT FLDR*2 
RPT DISC*1 
(off) 
RPT
*1 If a CD Changer or an MP3 compatible CD changer is connected and the RPT DISC mode is selected, the unit repeatedly plays back all tracks (files) on the disc selected.
*2 Only files in a folder are repeatedly played back.
*3 Display may vary depending on the connected devices.
M.I.X. (Random Play)
Touch [
] during playback.
The tracks (files) on the disc will be played back in a random sequence.
To cancel M.I.X. play, touch [
].
<Monitor display>
CD: M.I.X. 
M.I.X. ALL*1 
(off) 
M.I.X.
MP3/WMA:
1Touch [P1/2]*4 to change the function guide.
2Touch [
] and select the desired M.I.X. play.
<Monitor display>
M.I.X. FLDR*3 
M.I.X.*2 
(off) 
M.I.X. FLDR*3
*1 If a CD Changer equipped with the M.I.X. ALL function is connected, M.I.X. ALL will also be selectable.
In this mode, the tracks on all the CDs in the current magazine will be included in the random playback sequence.
*2 If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc.
*3 Only files in a folder are played back in random sequence in the M.I.X. FLDR mode.
*4 Display may vary depending on the connected devices.
Selecting Folders (concerning MP3/ WMA)
Touch [F.DN] or [F.UP] to select the folder.