![](/images/new-backgrounds/1242897/24289719x1.webp)
INTRODUCTION | NAVIGATION | RADIO MODE | CD MODE | CD CHANGER | SETUP | INDEX |
10
Theft protection KeyCard
The unit is supplied with a KeyCard.
The TravelPilot can also be operated using a second KeyCard.
Furthermore, the values that were set last for the frequency range, station tuner, traffic information announcement, RDS, REG, seek tuning sensitivity,
For information on how to prepare a second KeyCard for use with the TravelPi- lot, please refer to the section entitled “Preparing a second KeyCard” in the “Setup / basic settings” chapter.
Note: If you no longer have a KeyCard for the TravelPilot, you can prepare a new KeyCard yourself. For further information, read “Pre- paring a new KeyCard (“Learning”) / Entering the master code” in the “Setup / basic settings” chapter.
Inserting a KeyCard
To unlock the control panel,
1Press the button 1.
✔The control panel opens.
2Insert the KeyCard as shown in the picture (arrow 1) with the contact surfaces facing downwards.
3Carefully push the KeyCard and the KeyCard slide in the direction of the arrow (2) until they go no further.
4Close the control panel (arrow 3).
1
3
2