Navigation
Starting navigation
Once you enter a destination, navigation begins automatically.
If you want to begin a navigation session to the navigation system’s last destina- tion,
1select the ROUTE GUIDANCE menu item in the main navigation menu.
2Confirm your selection by pressing the OK button 8.
TIP: You can also begin navigation using the macro button.
✔The navigation session display appears. The route is calculated. This can take several seconds depending on the distance to the destination. When the navigation session display appears you will hear the voice out- put: “The route is being calculated”. You will then hear the first navigation voice output when the calculation is complete.
The name of the road that you are currently driving down and the name of the road that the system suggests you should turn off into are dis- played in the title line of the navigation session display.
If you leave the road network covered by the navigation CD, OFF ROAD will be displayed in the title line.
The visual driving recommendations appear in the symbol area on left half of the display.
TIP: You can choose between a 2D and 3D display for the driving recom- mendations. To switch between the display modes, keep the OK button
8pressed until the display changes.
The approach bar appears in the centre of the display. It is a graphical representation of the distance to the decision point. On a longer stretch of road, the remaining distance to drive to the next decision point is dis- played.
NAVIGATION |
ROUTE GUIDANCE
DEST. ENTRY
DEST. MEMORY
TOURLIST
MERIANscout
SCHLOSSWEND… |
03h58
461 mi
Europe 1
Navigation session display, 2D display
ENGLISH
33
INTRODUCTION | NAVIGATION | RADIO MODE | CD MODE | CD CHANGER | SETUP | INDEX |