Blaupunkt DX-R70 Sort Dest, NEW Dest Store Dest Start Tour, Cancel Dest

Page 38

INTRODUCTION

NAVIGATION

RADIO MODE

CD MODE

CD CHANGER

SETUP

INDEX

38

You can now move the destination to the required position in the tour memory:

1Press the OK button 8.

✔A reposition marker appears in front of the destination.

2Use the / buttons on the rocker switch 7 to move the destination to the required position in the tour list.

3Press the OK button 8.

Using a destination from the destination memory as a new tour destination

1To assign a tour destination from the destination memory, select the NEW DEST. item in the TOUR LIST menu.

2Press the OK button 8.

✔The DEST. ENTRY menu appears.

3Select DEST. MEMORY.

✔The DEST. MEMORY menu appears.

4Select the destination memory from which you would like to use a desti- nation.

✔The contents of the selected destination memory are displayed.

5Select the destination that you want to use in the tour list.

6Press the OK button 8.

✔The tour list is displayed. You can now move the destination to the re- quired position.

Using the navigation system’s last destination

To use the navigation system’s last (current) destination,

1select the STORE DEST. item in the TOUR LIST menu.

2Press the OK button 8.

✔The destination is entered in the tour list. The tour list is displayed.

TOUR LIST

NEW DEST.

STORE DEST.

START TOUR

CANCEL DEST.

SORT DEST.

TOUR LIST

NEW DEST.

STORE DEST.

START TOUR

CANCEL DEST.

SORT DEST.

TOUR LIST

NEW DEST.

STORE DEST.

START TOUR

CANCEL DEST.

SORT DEST.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents
TravelPilot DX-R70 Device overview English Dear Customer Guarantee Overview of navigation functions DEST. Entry HannoverBerlin Street Safety information CD mode Switching the unit on/offRadio mode Index 112 Installation instructions 338About these instructions Theft protection KeyCard Inserting a KeyCardRemoving the KeyCard Looking after the KeyCardSwitching on when the vehicle ignition is off Switching the unit on/offSwitching on/off using the KeyCard Selecting the operating mode Switching between the main menu and functions menuAutomatic volume mute during telephone calls Adjusting the volumeOpening the setup menu Jump Radio BBC Europe JAM FM EinsliveBBC JumpRadio JAM EinsliveLoudness + FM Tone Adjusting audio settings and sound distribution settingsTreble + BassInserting the navigation CD NavigationHow navigation works DEST. Memory Tourlist Route GuidanceDEST. Entry Starting navigationÄÖÜ Entering destinations using the spellerCITY⁄PLACE Selecting lettersSwitching to special character sets HH HannoverRoute List Selecting list entries Street Centre DEST. EntryCity Entering a destination townCity StreetCentre DEST. Surround Entering a destination street, junction and house numberEntering a destination house number ContinueIntersection House Number Centre AUF DEM LOHCity Street Entering a destination centreCity Street Centre DEST.AREA SUPRAREG.DESTS DEST. Surround POS. SurroundSpecial destinations at your final destination DEST.AREA SUPRAREG.DESTS DEST. Surround POS. Surround Special destinations national destinationsSpecial destinations position surrounding area DEST. SurroundSpecial destinations destination surrounding area Entering a destination from the destination memory Last Position MarkALPH. Sorting Entering a destination position marker Selecting a position marker as a destinationStarting navigation Route GuidanceDEST. Entry DEST. Memory Tourlist Navigation session display, 3D display Changing the audio source Cancelling navigationDo YOU Want To Interrupt Route GUIDANCE? YES no Route Option Route DYNTour List Store Dest Start Tour Cancel Dest Sort Dest Tour ListStore Dest Start Tour Cancel Dest Sort Dest NEW DestStore Dest Cancel DestNEW Dest Sort DestStart Tour Cancel Dest Sort DestSort Dest Tour List NEW Dest Store Dest Sorting the tourDeleting the whole tour Starting a navigation session to a tour destinationNo MAP navigation Travel guideDisplaying the route list DEST. Entry DEST. Memory Tour ListLocating Route List Position tracking mode Destination memorySave Dest Enter Dest Clear Dest Modify Dest Save Dest Enter Dest Clear DestModify Dest Saving a destination in memoryModify Dest Sort Dest Save Dest Enter DestClear Dest Sorting destinations manuallyGPS status Route Option Route List Position Mark Traffic Ahead From Modify RouteTraffic Ahead Clear OKExcluding a route Cancelling the traffic jam bypass featureExcluding a route section from the route list Cancelling / changing exclusions Defining route options Route Fast Motorway withFerry with Toll with Continue Route Option Route Option Route List TA on Symbols 2DSetting a position marker Position MarkSaving a position marker HomePqrstuvwxyz Traffic announcements during navigation Route Option Route List Position MarkTA on Activating / deactivating voice outputMAN. Position Navi Simulat Language on LAST10 AANTime Info Activating / deactivating the last 10 destinations memoryNavi Simulat Manually setting your positionLanguage on LAST10 on Time Info MA. Position Simulating navigation FM2 Radio modeFM1 Activating / deactivating RDS-REG REG OFF PTY Sharx RDSOFF TXT REG on OFF TA PTY on OFF Sharx RDS VAR OFF R-TXT Switching PTY on/offPTY alarm Sharx Activating / deactivating the TA function for radio modeREG PTY RDSTMC Traffic Message Channel Interrupting a traffic announcementTuning into stations manually Tuning into FM stationsAutomatic seek tuning Tuning into MW stations Scan seek tuningStore Scan Tmcstore TMC-SCAN Starting scan seek tuningStopping scan seek tuning TMC ScanStoring stations manually Storing stationsStopping TMC Scan Starting Travelstore Store Scan Tmcstore TMC-SCANStoring stations automatically Travelstore Storing TMC stations automatically TMC StoreStarting TMC Store Reducing reception interference in FM modeREG PTY Sharx RDS Activating / deactivating SharxActivating / deactivating radiotext REG on on TA PTY on on Sharx RDS VAR on R-TXTDisplaying radiotext Recording traffic information TIM 24H TIM-INFO V-INFOTIM Traffic Information Memory Switching TIM on / off, changing the recording standby time Listening to stored traffic messagesDeactivating TIM recording standby whilst in the car wash Viewing TMC messages Inserting a CD CD modePlaying a CD Time OFF Switching the playing time display on/offMIX Scan Starting internal CD playback no CD changer is connectedSelecting tracks Traffic announcements during CD modeTime on on TA MIX ScanRepeating tracks Repeat MIX CDC ScanRepeat Naming CDsEntering a name Stones SCLR Name CLR ALL Edit Deleting charactersDeleting all names CLR Name CLR ALL Edit MIX CDC ScanProgramming playlists Defining a playlistDeleting tracks from playlists CLR PRGADD RUN Skip Starting / stopping a playlistDeleting individual playlists Deleting all playlists in memoryStones CD changer modeSwitching to CD changer mode DoorsStones Cocker Mozart Selecting a CD Replaying tracksScanning tracks Scan Time on on TA Scan MAG TRK RPT MIX CD TimeRPT Repeating tracks or CDs RepeatCLR PRG ADD CLR ALL RUN Skip Activating the repeat function for CDsPress the softkey assigned to the RUN menu item CLR Name CLR ALL Edit Doors S CLR Name CLR ALL Edit Time on on TA Scan MAG TRK RPT MIX CD Activating / deactivating traffic announcements CD changer Activating navigation Steering wheel remote controlSelecting an audio source Cancelling mute MutingSetup basic settings SettingsDefault SET DisplayDAY⁄NIGHT Adjusting the viewing angleDisplay Angle Brightness DAY NightAdjusting the fading effect for menus VolumeAdjusting the display brightness Special EFFClock Language TA-MIN NAVI-MIN Gala Phone Settings Display VolumeMacro Button Programming the macro buttonLast DEST. Memory Position Mark GPS StatusTime Forma Settings Status Clock OFF Main ClockSetting the clock Time Zone Summer TIMActivating summer time Setting the time zoneSetting the time manually Selecting the language System Test InstallationNEW Install Status Manual Calibration GPS StatusMIN 350 ft 123456789 Manually calibrating the systemCODE-LED on Calibration GPS Status Settings InstallDefault SET FM-SEEK Sens Keycard Activating / deactivating the code LEDResetting to the factory defaults Install CODE-LED onDefault SET. FM-SEEKSENS Keycard Install CODE-LED on Default SET. FM-SEEK Sens Keycard Setting seek tuning sensitivityPreparing a second KeyCard Preparing a new KeyCard Learning / Entering the master codeFactory default settings Setting Default setting DisplayClock VolumeMacro button Code-LED RadioSound CD changerNavigation Index Repeat Blaupunkt GmbH
Top Page Image Contents