Blaupunkt DX-R70 operating instructions MIN 350 ft 123456789, Manually calibrating the system

Page 104

INTRODUCTION

NAVIGATION

RADIO MODE

CD MODE

CD CHANGER

SETUP

INDEX

104

Note: No navigation is possible during the first 25% of the calibrati- on procedure after NEW INSTALL is selected.

The route that you have to drive along depends on various factors such as the quality of GPS reception and the route itself. The speci- fied distance in kilometres is only an average value. It can also be considerably shorter or considerably longer if conditions are poor.

Calibration after a tyre change

It may be necessary to recalibrate the TravelPilot after a tyre change.

1Select CALIBRATION from the INSTALLATION setup menu.

2Select and confirm the TYRE CHANGE menu item.

3Carry out the steps as instructed by the system.

Manually calibrating the system

You can also manually calibrate the system. You will be required to drive a route of at least 100 meters at a maximum speed of 30 km/h. Please note that a route must be used that has been measured as precisely as possible.

1Select CALIBRATION from the INSTALLATION setup menu.

2Select and confirm the MANUAL menu item.

✔You will now be asked to enter the length of the route that you want to drive.

3Select the first digit of the route length and

4press the OK button 8.

5Enter the remaining digits of the route length in the same way.

6Confirm the details you entered using the symbol and the OK button 8 or by pressing the OK button 8 for a longer period.

DISTANCE

MIN 350 ft															0




	0	123456789

Image 104

Contents TravelPilot DX-R70 Device overview English Dear Customer Guarantee Overview of navigation functions DEST. Entry HannoverBerlin Street Safety information Switching the unit on/off Radio modeCD mode Index 112 Installation instructions 338About these instructions Theft protection KeyCard Inserting a KeyCardRemoving the KeyCard Looking after the KeyCardSwitching on when the vehicle ignition is off Switching the unit on/offSwitching on/off using the KeyCard Selecting the operating mode Switching between the main menu and functions menuAdjusting the volume Opening the setup menuAutomatic volume mute during telephone calls Jump Radio BBC Europe JAM FM EinsliveJump RadioBBC JAM EinsliveAdjusting audio settings and sound distribution settings Treble +Loudness + FM Tone BassInserting the navigation CD NavigationHow navigation works Route Guidance DEST. EntryDEST. Memory Tourlist Starting navigationEntering destinations using the speller CITY⁄PLACEÄÖÜ Selecting lettersSwitching to special character sets HH HannoverRoute List Selecting list entries DEST. Entry CityStreet Centre Entering a destination townStreet Centre DEST. SurroundCity Entering a destination street, junction and house numberEntering a destination house number ContinueIntersection House Number AUF DEM LOH City StreetCentre Entering a destination centreCity Street Centre DEST.AREA SUPRAREG.DESTS DEST. Surround POS. SurroundSpecial destinations at your final destination DEST.AREA SUPRAREG.DESTS DEST. Surround POS. Surround Special destinations national destinationsSpecial destinations position surrounding area DEST. SurroundSpecial destinations destination surrounding area Entering a destination from the destination memory Last Position MarkALPH. Sorting Entering a destination position marker Selecting a position marker as a destinationStarting navigation Route GuidanceDEST. Entry DEST. Memory Tourlist Navigation session display, 3D display Changing the audio source Cancelling navigationDo YOU Want To Interrupt Route GUIDANCE? YES no Route Option Route DYNStore Dest Start Tour Cancel Dest Sort Dest Tour List Store Dest Start Tour Cancel Dest Sort DestTour List NEW DestCancel Dest NEW DestStore Dest Sort DestCancel Dest Sort Dest Sort Dest Tour List NEW Dest Store DestStart Tour Sorting the tourDeleting the whole tour Starting a navigation session to a tour destinationNo MAP navigation Travel guideDisplaying the route list DEST. Entry DEST. Memory Tour ListLocating Route List Position tracking mode Destination memorySave Dest Enter Dest Clear Dest Modify DestSave Dest Enter Dest Clear Dest Modify Dest Saving a destination in memorySave Dest Enter Dest Clear DestModify Dest Sort Dest Sorting destinations manuallyGPS status Modify Route Traffic AheadRoute Option Route List Position Mark Traffic Ahead From Clear OKExcluding a route Cancelling the traffic jam bypass featureExcluding a route section from the route list Cancelling / changing exclusions Defining route options Route Fast Motorway withFerry with Toll with Continue Route Option TA on Symbols 2D Setting a position markerRoute Option Route List Position MarkSaving a position marker HomePqrstuvwxyz Route Option Route List Position Mark TA onTraffic announcements during navigation Activating / deactivating voice outputLanguage on LAST10 AAN Time InfoMAN. Position Navi Simulat Activating / deactivating the last 10 destinations memoryNavi Simulat Manually setting your positionLanguage on LAST10 on Time Info MA. Position Simulating navigation FM2 Radio modeFM1 Activating / deactivating RDS-REG REG OFF PTY Sharx RDSOFF TXT REG on OFF TA PTY on OFF Sharx RDS VAR OFF R-TXT Switching PTY on/offPTY alarm Activating / deactivating the TA function for radio mode REG PTYSharx RDSTMC Traffic Message Channel Interrupting a traffic announcementTuning into stations manually Tuning into FM stationsAutomatic seek tuning Tuning into MW stations Scan seek tuningStarting scan seek tuning Stopping scan seek tuningStore Scan Tmcstore TMC-SCAN TMC ScanStoring stations manually Storing stationsStopping TMC Scan Store Scan Tmcstore TMC-SCAN Storing stations automatically TravelstoreStarting Travelstore Storing TMC stations automatically TMC StoreReducing reception interference in FM mode REG PTY Sharx RDSStarting TMC Store Activating / deactivating SharxActivating / deactivating radiotext REG on on TA PTY on on Sharx RDS VAR on R-TXTDisplaying radiotext Recording traffic information TIM 24H TIM-INFO V-INFOTIM Traffic Information Memory Switching TIM on / off, changing the recording standby time Listening to stored traffic messagesDeactivating TIM recording standby whilst in the car wash Viewing TMC messages Inserting a CD CD modePlaying a CD Switching the playing time display on/off MIX ScanTime OFF Starting internal CD playback no CD changer is connectedSelecting tracks Traffic announcements during CD modeTime on on TA MIX ScanMIX CDC Scan RepeatRepeating tracks Repeat Naming CDsStones S CLR Name CLR ALL EditEntering a name Deleting charactersCLR Name CLR ALL Edit MIX CDC Scan Programming playlistsDeleting all names Defining a playlistCLR PRG ADD RUN SkipDeleting tracks from playlists Starting / stopping a playlistDeleting individual playlists Deleting all playlists in memoryCD changer mode Switching to CD changer modeStones DoorsStones Cocker Mozart Selecting a CD Replaying tracksScanning tracks Scan Time RPTTime on on TA Scan MAG TRK RPT MIX CD Repeating tracks or CDs RepeatCLR PRG ADD CLR ALL RUN Skip Activating the repeat function for CDsPress the softkey assigned to the RUN menu item CLR Name CLR ALL Edit Doors S CLR Name CLR ALL Edit Time on on TA Scan MAG TRK RPT MIX CD Activating / deactivating traffic announcements CD changer Activating navigation Steering wheel remote controlSelecting an audio source Cancelling mute MutingSettings Default SETSetup basic settings DisplayAdjusting the viewing angle DisplayDAY⁄NIGHT Angle Brightness DAY NightVolume Adjusting the display brightnessAdjusting the fading effect for menus Special EFFTA-MIN NAVI-MIN Gala Phone Settings Display Volume Macro ButtonClock Language Programming the macro buttonLast DEST. Memory Position Mark GPS StatusSettings Status Clock OFF Main Clock Setting the clockTime Forma Time Zone Summer TIMActivating summer time Setting the time zoneSetting the time manually Selecting the language Installation NEW Install Status ManualSystem Test Calibration GPS StatusMIN 350 ft 123456789 Manually calibrating the systemCalibration GPS Status Settings Install Default SET FM-SEEK Sens KeycardCODE-LED on Activating / deactivating the code LEDResetting to the factory defaults Install CODE-LED onDefault SET. FM-SEEKSENS Keycard Install CODE-LED on Default SET. FM-SEEK Sens Keycard Setting seek tuning sensitivityPreparing a second KeyCard Preparing a new KeyCard Learning / Entering the master codeFactory default settings Setting Default setting DisplayVolume Macro buttonClock Code-LED RadioSound CD changerNavigation Index Repeat Blaupunkt GmbH