![](/images/new-backgrounds/1242897/242897211x1.webp)
INTRODUCTION | NAVIGATION | RADIO MODE | CD MODE | CD CHANGER | SETUP | INDEX |
106
Resetting to the factory defaults
You can reset the TravelPilot to its default settings. This affects all the settings for the navigation system and the audio sources.
1Select DEFAULT SET. from the setup menu.
Step 1: If a navigation CD is inserted, you will be asked whether you want to reset the navigation system’s values. This affects all of the destination memory and the route options. If no navigation CD is inserted, the next query is display- ed straight away.
2If you want to delete the settings, press YES or
2to retain the navigation system’s settings, select NO.
Step 2: This query refers to deleting the name and playlist memory for CD mode.
3To reset the settings, select YES, otherwise
3select NO.
Step 3: The last step affects all the options, all the setup settings and all the sound settings of the audio sources.
4If you want to delete the settings, press YES or
4to retain the settings, select NO.
If you confirmed at least one item with YES, the device will be reset. The unit is then switched off and back on.
Note: A table containing the factory default settings for the device is located at the end of this chapter.
SETTINGS |