Blaupunkt DX-R70 Treble +, Loudness + FM Tone, Bass, Treble Balance Fader Loudness

Page 16

INTRODUCTION

NAVIGATION

RADIO MODE

CD MODE

CD CHANGER

SETUP

INDEX

16

Adjusting audio settings and sound distribution settings

The TravelPilot allows you to adjust the bass and treble for each audio source.

Changes to the balance and fader sound distribution settings and loudness set- tings (aurally compensated volume) affect all the audio sources.

To adjust the audio settings,

1press the TUNE button A or CD.C button @ to switch to the audio source (radio, CD or CD changer) for which you would like to adjust the settings.

2Press the AUD button ;.

✔The audio settings menu opens.

3Use the / buttons on the rocker switch 7 to move the selection marker to the menu item whose settings you want to change.

4Use the / buttons on the rocker switch 7 to make the adjustments.

✔The slide control is highlighted.

If you wish to apply your adjusted values,

5press the OK button 8.

✔The border around the slide control disappears and the values are saved.

Note: If you do not press a button within 30 seconds, the display will switch back automatically to the initial menu (timeout).

FM TONE

BASS - +

TREBLE - +

BALANCE FADER

LOUDNESS - +

FM TONE
BASS	-	+
TREBLE	-	+
BALANCE
FADER
LOUDNESS -		+

Audio menu for the FM radio audio source

Image 16

Contents TravelPilot DX-R70 Device overview English Dear Customer Guarantee Overview of navigation functions DEST. Entry HannoverBerlin Street Safety information Switching the unit on/off Radio modeCD mode Index 112 Installation instructions 338About these instructions Theft protection KeyCard Inserting a KeyCardRemoving the KeyCard Looking after the KeyCardSwitching on/off using the KeyCard Switching the unit on/offSwitching on when the vehicle ignition is off Selecting the operating mode Switching between the main menu and functions menuAdjusting the volume Opening the setup menuAutomatic volume mute during telephone calls Jump Radio BBC Europe JAM FM EinsliveJump RadioBBC JAM EinsliveAdjusting audio settings and sound distribution settings Treble +Loudness + FM Tone BassHow navigation works NavigationInserting the navigation CD Route Guidance DEST. EntryDEST. Memory Tourlist Starting navigationEntering destinations using the speller CITY⁄PLACEÄÖÜ Selecting lettersSwitching to special character sets HH HannoverRoute List Selecting list entries DEST. Entry CityStreet Centre Entering a destination townStreet Centre DEST. SurroundCity Entering a destination street, junction and house numberIntersection House Number ContinueEntering a destination house number AUF DEM LOH City StreetCentre Entering a destination centreCity Street Centre DEST.AREA SUPRAREG.DESTS DEST. Surround POS. SurroundSpecial destinations at your final destination DEST.AREA SUPRAREG.DESTS DEST. Surround POS. Surround Special destinations national destinationsSpecial destinations destination surrounding area DEST. SurroundSpecial destinations position surrounding area ALPH. Sorting Last Position MarkEntering a destination from the destination memory Entering a destination position marker Selecting a position marker as a destinationDEST. Entry DEST. Memory Tourlist Route GuidanceStarting navigation Navigation session display, 3D display Do YOU Want To Interrupt Route GUIDANCE? YES no Cancelling navigationChanging the audio source Route Option Route DYNStore Dest Start Tour Cancel Dest Sort Dest Tour List Store Dest Start Tour Cancel Dest Sort DestTour List NEW DestCancel Dest NEW DestStore Dest Sort DestCancel Dest Sort Dest Sort Dest Tour List NEW Dest Store DestStart Tour Sorting the tourDeleting the whole tour Starting a navigation session to a tour destinationNo MAP navigation Travel guideLocating Route List DEST. Entry DEST. Memory Tour ListDisplaying the route list Position tracking mode Destination memorySave Dest Enter Dest Clear Dest Modify DestSave Dest Enter Dest Clear Dest Modify Dest Saving a destination in memorySave Dest Enter Dest Clear DestModify Dest Sort Dest Sorting destinations manuallyGPS status Modify Route Traffic AheadRoute Option Route List Position Mark Traffic Ahead From Clear OKExcluding a route section from the route list Cancelling the traffic jam bypass featureExcluding a route Cancelling / changing exclusions Ferry with Toll with Continue Route Option Route Fast Motorway withDefining route options TA on Symbols 2D Setting a position markerRoute Option Route List Position MarkPqrstuvwxyz HomeSaving a position marker Route Option Route List Position Mark TA onTraffic announcements during navigation Activating / deactivating voice outputLanguage on LAST10 AAN Time InfoMAN. Position Navi Simulat Activating / deactivating the last 10 destinations memoryLanguage on LAST10 on Time Info MA. Position Manually setting your positionNavi Simulat Simulating navigation FM1 Radio modeFM2 OFF TXT REG OFF PTY Sharx RDSActivating / deactivating RDS-REG PTY alarm Switching PTY on/offREG on OFF TA PTY on OFF Sharx RDS VAR OFF R-TXT Activating / deactivating the TA function for radio mode REG PTYSharx RDSTMC Traffic Message Channel Interrupting a traffic announcementAutomatic seek tuning Tuning into FM stationsTuning into stations manually Tuning into MW stations Scan seek tuningStarting scan seek tuning Stopping scan seek tuningStore Scan Tmcstore TMC-SCAN TMC ScanStopping TMC Scan Storing stationsStoring stations manually Store Scan Tmcstore TMC-SCAN Storing stations automatically TravelstoreStarting Travelstore Storing TMC stations automatically TMC StoreReducing reception interference in FM mode REG PTY Sharx RDSStarting TMC Store Activating / deactivating SharxDisplaying radiotext REG on on TA PTY on on Sharx RDS VAR on R-TXTActivating / deactivating radiotext TIM Traffic Information Memory TIM 24H TIM-INFO V-INFORecording traffic information Switching TIM on / off, changing the recording standby time Listening to stored traffic messagesDeactivating TIM recording standby whilst in the car wash Viewing TMC messages Playing a CD CD modeInserting a CD Switching the playing time display on/off MIX ScanTime OFF Starting internal CD playback no CD changer is connectedTime on on TA Traffic announcements during CD modeSelecting tracks MIX ScanMIX CDC Scan RepeatRepeating tracks Repeat Naming CDsStones S CLR Name CLR ALL EditEntering a name Deleting charactersCLR Name CLR ALL Edit MIX CDC Scan Programming playlistsDeleting all names Defining a playlistCLR PRG ADD RUN SkipDeleting tracks from playlists Starting / stopping a playlistDeleting individual playlists Deleting all playlists in memoryCD changer mode Switching to CD changer modeStones DoorsStones Cocker Mozart Selecting a CD Replaying tracksScanning tracks Scan Time RPTTime on on TA Scan MAG TRK RPT MIX CD Repeating tracks or CDs RepeatCLR PRG ADD CLR ALL RUN Skip Activating the repeat function for CDsPress the softkey assigned to the RUN menu item CLR Name CLR ALL Edit Doors S CLR Name CLR ALL Edit Time on on TA Scan MAG TRK RPT MIX CD Activating / deactivating traffic announcements CD changer Selecting an audio source Steering wheel remote controlActivating navigation Cancelling mute MutingSettings Default SETSetup basic settings DisplayAdjusting the viewing angle DisplayDAY⁄NIGHT Angle Brightness DAY NightVolume Adjusting the display brightnessAdjusting the fading effect for menus Special EFFTA-MIN NAVI-MIN Gala Phone Settings Display Volume Macro ButtonClock Language Programming the macro buttonLast DEST. Memory Position Mark GPS StatusSettings Status Clock OFF Main Clock Setting the clockTime Forma Time Zone Summer TIMSetting the time manually Setting the time zoneActivating summer time Selecting the language Installation NEW Install Status ManualSystem Test Calibration GPS StatusMIN 350 ft 123456789 Manually calibrating the systemCalibration GPS Status Settings Install Default SET FM-SEEK Sens KeycardCODE-LED on Activating / deactivating the code LEDDefault SET. FM-SEEKSENS Keycard Install CODE-LED onResetting to the factory defaults Install CODE-LED on Default SET. FM-SEEK Sens Keycard Setting seek tuning sensitivityPreparing a second KeyCard Preparing a new KeyCard Learning / Entering the master codeFactory default settings Setting Default setting DisplayVolume Macro buttonClock Code-LED RadioNavigation CD changerSound Index Repeat Blaupunkt GmbH