INTRODUCTION | NAVIGATION | RADIO MODE | CD MODE | CD CHANGER | SETUP | INDEX |
36
Dynamic navigation
During dynamic navigation, the TravelPilot
Before you can use dynamic navigation, you must first select the DYN. option for the ROUTE menu item.The ROUTE menu item can be found under the ROUTE OPTION menu item in the navi menu. The route option settings are kept until they are changed again.
If you want to make a currently active navigation session dynamic,
1press the MENU button : during the navigation session.
✔The navigation session’s navi menu appears.
2Select ROUTE OPTION.
3Press the OK button 8.
4Select the ROUTE menu item.
5Keep pressing the OK button 8 until DYN. appears in the display.
6Select the CONTINUE menu item.
7Press the OK button 8.
✔The unit switches back to navigation, and the settings are kept until they are changed again.
Note: When in dynamic navigation mode, the TravelPilot automati- cally sets a TMC station during navigation. If there is no TMC sta- tion stored in the FMC memory yet, TMC seek tuning begins. TMC seek tuning can take a long time because the entire frequency range is scanned for TMC stations. Radio mode is not available during this time.
NAVI. MENU |
MODIFY ROUTE
TRAFFIC AHEAD
ROUTE OPTION
ROUTE LIST
POSITION MARK
ROUTE OPTION |