
INTRODUCTION | NAVIGATION | RADIO MODE | CD MODE | CD CHANGER | SETUP | INDEX |
12
Switching the unit on/off
1To switch on the TravelPilot when the KeyCard is inserted, press the blue button 2 in the centre of the volume control 3.
✔The unit plays the audio source that was active last at the preset volume level.
You can find out how to set the
Switching on/off using the KeyCard
You can also switch the TravelPilot on/off by inserting and removing the Key-
Card.
Switching on when the vehicle ignition is off
You can also operate the TravelPilot when the ignition is off and the KeyCard is inserted.
1To do so, press the ON button 2.
✔The unit switches on.
After an hour has elapsed, the unit switches off automatically in order to protect the vehicle battery. You can repeat this procedure as often as you like. The imposed time limit is cancelled as soon as the ignition is turned on.
Note: To ensure that the TravelPilot functions properly and that in- creased power consumption is avoided, the unit must be connect- ed to the continuous power source and the power source via the ignition as described in the installation instructions.