Blaupunkt TCM 127 DSC learn mode, Displaying the radio pass data, Care of your KeyCard/SIM-Card

Page 10

CEPTED” (i.e. the 23rd SIM card has been trained).

The Radiophone can now be operated using the new cards.

A maximum of two KeyCards and 30 SIM cards can be trained in this way.

If you attempt to program a third Key- Card, the KeyCard which was not part of the programming process will auto- matically become invalid.

If 30 SIM cards have been pro- grammed, it will be necessary to delete old access authorizations before new cards can be trained.

b)Training new cards after removing the KeyCard or master SIM card

If this function is activated in the DSC learn mode, it is possible to train an- other SIM card each time the KeyCard/ master SIM card is removed. This function is useful if you want to train several cards one after the other (fleet management).

c)Deleting SIM card authorisations

The authorisation for SIM cards can be deleted using the CARD LIST in the DSC menu. The master SIM card can be deleted with a KeyCard only.

DSC learn mode

With this function you can select whether you want to train additional SIM cards using the DSC menu only or each time after re- moving the KeyCard or the master SIM card as well.

For operating instructions refer to “Program- ming with DSC – LEARN MODE”.

Displaying the radio pass data

Using the KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6...) and serial number indicated in the display.

Please refer to the section on “Programming with DSC – READ KEYCARD”.

Optical warning of anti-theft protection

KeyCard tongue flashes

When the vehicle has been parked and the KeyCard or SIM card removed, the KeyCard tongue can be switched to flash to provide additional anti-theft protection.

For this function to operate properly it is necessary that the positive power supply line and the permanent +12 V lead are connect- ed as described in the installation instruc- tions.

Be sure that “KEYCARD LED ON” has been selected in the DSC mode.

If necessary, refer to the section on “Pro- gramming with DSC – KEYCARD LED”.

Switching off the flashing light

The flashing light can be switched off by pushing in the KeyCard tongue gently until it locks.

If you would like to deactivate the flashing tongue altogether, select the “KEYCARD LED OFF” item in the DSC menu:

Care of your KeyCard/SIM-Card

In order to ensure that the card always func- tions correctly, the contacts must be free of any foreign particles. Avoid direct skin con- tact.

Do not subject the cards to direct sunlight. If necessary, clean the card contacts using a cotton swab dipped in rubbing alcohol.

72

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Amsterdam TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Important information Safety standardsSafety information General informationUsing the telephone in critical areas InstallationEmergency calls Changer AccessoriesRemote control HandsetStarting up the Radiophone KeyCard and SIM cardBasic information Second KeyCard/SIM cardSelecting the language for the display Removing the KeyCard/SIM cardTrain KeyCard/SIM cards Never forcibly pull out the card! You may destroy itOptical warning of anti-theft protection DSC learn modeDisplaying the radio pass data Care of your KeyCard/SIM-CardSwitching the unit on/off via the ig- nition On/off VolumeSwitching the unit on/off with the KeyCard Switching the radio on when the ig- nition is switched offSRC Source TS / BNDRecalling stored radio stations -Se Cassette loading slotStoring radio stations AF / #Radio operation a = MIXDisplay Cassette operation Changer operation optionalFlashing card tongue Tape operationStop this function by pressing or the opposite button DSC mode C Additional rocker switch functionsAdditional settings possible with AUD Corresponding function must be activatedREG regional programme Audio modeAF Alternative Frequency Radio, tape deck, CD changer optional, auxiliary sourceManual tuning with Station tuningSeek tuning Selecting a wavebandScrolling through the broadcast- ing networks FM only Storing radio stationsSwitching from stereo to mono FM only Selecting the seek-tuning sensi- tivityRecalling stored radio stations Switching off the beep tone Switching traffic announcement priority on/offAutomatic seek tuning start Traffic programme station reception with RDS-EONOperating the cassette deck Dolby B NR Tape equalisationCare instructions CD changer operation optional Switching CD changer operation onSelecting the CD and the track Alter CancelSelect StoreLoud 1 minimum boost Loud 6 maximum boost To make a note of the new codeRAD. Monitor Radio Monitor Tone setting for voice programs ranges between Level 0Music/voice is switched off With this function you can deterRemove menu items All of the menu items are availa- ble You can choose among the fol- lowing operating modesOverview of the DSC default settings End DSC programming/save changesPage Telephone operation Inserting the SIM card/ entering your PIN code Operating the telephonePIN code Reactivating the SIM cardGSM emergency calls Making your first telephone callDo not hang up until you are told to do so On/Off Quick reference for using the telephoneVolume Selection buttonsDisplays Radio menu Enter PIN code Network search Setup menu/Call menuTo switch back to the telephone mode Press briefly Telephone-book menu@ Rocker switch GSM network service area Using the telephoneSwitching to telephone mode Dialling a telephone numberRedial function Call waiting 2nd caller Answering/ending a callBroker’s call/hold Setting up a conference call Making telephone calls using the handset special accessoryConference calls Phone book menu 103How to enter a name/text Finding an entry by name Show my phone number Prevent accessCheck capacity Finding an entry by position Add entryAltering, deleting, moving or copying the entry Store/confirm Press CL, the altered setting will not be storedProgramming with DSC Telephone End DSCSelect the setup menu by pressing Programming in the setup menu109 Automatic redial Operating mode Ringing tone volumeHands-free volume Automatic answer Handset volumeMy phone number Ringing toneSMS tone Call meter formatPIN code Audible call timerSet charge parameters External alarm Alter access codeFollowing settings will be deleted Be sure to make a note of the new code if you change itHands-free operation is possible on all four channels Overview of the basic factory settings in the set-up menuHands-free channel TA during callProgramming in the Call Menu Press CL, the new setting will not be stored115 Reading messages Call mailbox Received SMS messagesSelecting the message Clearing messagesCalling the sender or another telephone Sending SMS messagesNetwork selection Sages Cell BroadcastWhich operates in numbered channels Available channels from your network OperatorCall forwarding Call metersCall barring One-touch dial only Phone lockYou can only call the one-touch dial To 9 and the SIM card Speed/touch dial onlyOverview of the basic factory settings in the call menu Closed user groupGlossary Telephone SpecificationsTuner Tape deckBlaupunkt telephone help line 01 80 / 5 25 56Bosch Gruppe
Top Page Image Contents