Blaupunkt TCM 127 Using the telephone, Switching to telephone mode, GSM network service area

Page 37

Using the telephone

All of the telephone functions can be oper- ated using a trained SIM card.

With the card tongue protruding, insert the trained SIM card into the slot with the contact surface facing up.

Switch the unit on.

If you have not yet trained any SIM cards, refer to the section on “Train or delete Key- Card/SIM card”.

Switching to telephone mode

It is possible to switch to the telephone mode from any of the audio modes.

Press .

Manual

Dial the number using the number keys.

The number you enter will appear in the dis- play.

RadioDEUTSCH

GSM network service area

To be able to use the telephone, you must be located in an area served by the GSM network. As soon as a network signal is re- ceived, the symbol indicating the signal

strength and an antenna symbol will appear in the display. If the signal is not strong enough your call may be disconnect- ed. If the antenna symbol is flashing, it is possible to make emergency calls only. If the antenna is displayed on a dark back- ground, you are located in an area serviced by a roaming network (may be subject to additional charges).

The display will indicate the network and the network operator if a network signal is re- ceived. The antenna symbol will not flash.

Dialling a telephone number

The telephone mode must be switched on.

Always use the area code for the number you are dialling, even if it is a local number.

Correcting the number

To delete a digit:

Select the digit you wish to correct us- ing the rocker switch << / >> (digit will flash).

Press CL briefly.

To delete a number:

Press CL for approx. 1 second.

To start dialling/end call:

Press .

ENGLISHTelefon

TelephoneRadio

99

Image 37
Contents Amsterdam TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Safety information Safety standardsImportant information General informationUsing the telephone in critical areas InstallationEmergency calls Remote control AccessoriesChanger HandsetBasic information KeyCard and SIM cardStarting up the Radiophone Second KeyCard/SIM cardTrain KeyCard/SIM cards Removing the KeyCard/SIM cardSelecting the language for the display Never forcibly pull out the card! You may destroy itDisplaying the radio pass data DSC learn modeOptical warning of anti-theft protection Care of your KeyCard/SIM-CardSwitching the unit on/off with the KeyCard On/off VolumeSwitching the unit on/off via the ig- nition Switching the radio on when the ig- nition is switched offTS / BND SRC SourceStoring radio stations Cassette loading slotRecalling stored radio stations -Se AF / #Display = MIXRadio operation a Cassette operation Changer operation optionalFlashing card tongue Tape operationStop this function by pressing or the opposite button Additional settings possible with AUD Additional rocker switch functionsDSC mode C Corresponding function must be activatedAF Alternative Frequency Audio modeREG regional programme Radio, tape deck, CD changer optional, auxiliary sourceSeek tuning Station tuningManual tuning with Selecting a wavebandStoring radio stations Scrolling through the broadcast- ing networks FM onlySwitching from stereo to mono FM only Selecting the seek-tuning sensi- tivityRecalling stored radio stations Automatic seek tuning start Switching traffic announcement priority on/offSwitching off the beep tone Traffic programme station reception with RDS-EONOperating the cassette deck Dolby B NR Tape equalisationCare instructions CD changer operation optional Switching CD changer operation onSelecting the CD and the track Select CancelAlter StoreTo make a note of the new code Loud 1 minimum boost Loud 6 maximum boostMusic/voice is switched off Tone setting for voice programs ranges between Level 0RAD. Monitor Radio Monitor With this function you can deterYou can choose among the fol- lowing operating modes Remove menu items All of the menu items are availa- bleEnd DSC programming/save changes Overview of the DSC default settingsPage Telephone operation PIN code Operating the telephoneInserting the SIM card/ entering your PIN code Reactivating the SIM cardGSM emergency calls Making your first telephone callDo not hang up until you are told to do so Volume Quick reference for using the telephoneOn/Off Selection buttonsTo switch back to the telephone mode Press briefly Enter PIN code Network search Setup menu/Call menuDisplays Radio menu Telephone-book menu@ Rocker switch Switching to telephone mode Using the telephoneGSM network service area Dialling a telephone numberRedial function Call waiting 2nd caller Answering/ending a callBroker’s call/hold Setting up a conference call Making telephone calls using the handset special accessoryConference calls 103 Phone book menuHow to enter a name/text Finding an entry by name Show my phone number Prevent accessCheck capacity Finding an entry by position Add entryAltering, deleting, moving or copying the entry Programming with DSC Telephone Press CL, the altered setting will not be storedStore/confirm End DSCSelect the setup menu by pressing Programming in the setup menu109 Hands-free volume Automatic answer Ringing tone volumeAutomatic redial Operating mode Handset volumeSMS tone Ringing toneMy phone number Call meter formatPIN code Audible call timerSet charge parameters Following settings will be deleted Alter access codeExternal alarm Be sure to make a note of the new code if you change itHands-free channel Overview of the basic factory settings in the set-up menuHands-free operation is possible on all four channels TA during callProgramming in the Call Menu Press CL, the new setting will not be stored115 Selecting the message Call mailbox Received SMS messagesReading messages Clearing messagesSending SMS messages Calling the sender or another telephoneNetwork selection Which operates in numbered channels Cell BroadcastSages Available channels from your network OperatorCall forwarding Call metersCall barring You can only call the one-touch dial Phone lockOne-touch dial only To 9 and the SIM card Speed/touch dial onlyClosed user group Overview of the basic factory settings in the call menuGlossary Tuner SpecificationsTelephone Tape deck01 80 / 5 25 56 Blaupunkt telephone help lineBosch Gruppe