Blaupunkt TCM 127 KeyCard and SIM card, Basic information, Starting up the Radiophone

Page 8

KeyCard and SIM card

KeyCard

Basic information

One KeyCard is included with the Radio- phone.

The car radio can also be operated with a second “trained” KeyCard or with one of up to 30 trainable SIM cards.

Using the KeyCard it is possible to activate the following operating modes:

Radio, tape deck, CD changer (optional), AUX, telephone emergency call.

Using the SIM card it is possible to activate all operating modes.

The SIM card also incorporates the anti-theft functions.

If necessary (in the event of loss or dam- age), it is possible to purchase a KeyCard or SIM card from an authorised dealer.

Second KeyCard/SIM card

If you use a second KeyCard or a SIM card, the settings will be transferred from the first KeyCard.

It is possible to store the following functions as personal settings on the second Key- Card:

Station presets, treble, bass, balance and fader, Loudness on/off, TA (traffic an- nouncement volume), VOLUME FIX.

The two KeyCards and the first two SIM cards will store the last setting selected for the waveband, bass/treble, fader/balance, station settings, station presets, VOLUME FIX.

When you insert your KeyCard or one of the first two SIM cards, you will find that the equipment switches onto the basic settings you have already programmed.

Wrong KeyCard

If a KeyCard from another radio is inserted into the unit, “KEYCARD ERROR” will ap- pear in the display. Please do not try to op- erate the equipment.

After approx. 8 sec. the radio will switch off automatically.

If the wrong KeyCard is inserted four times, the waiting time will increase to one hour.

If you attempt to insert a different kind of card (e.g. telephone or credit card), “CHECK KEYCARD” or “PRÜFE KEYCARD” will ap- pear in the display for approx. 2 sec.

Remove the wrong card and replace it with a valid KeyCard or SIM card.

Starting up the Radiophone

Switch the unit on (press 1).

Important!

The Card tongue must protrude - then insert the KeyCard included with the Radiophone into the slot with the con- tact surface facing up.

Do not try to insert the KeyCard when the tongue is retracted as this may damage the KeyCard mechanism.

The Radiophone is now ready for operation.

Resuming equipment operation after the power has been disconnected

If the Radiophone is disconnected from the battery (e.g. during repairs) and then recon- nected, a trained KeyCard or the master SIM card is required to resume equipment oper- ation and to reactivate the other trained SIM cards.

70

Image 8
Contents Amsterdam TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Safety standards Safety informationImportant information General informationEmergency calls InstallationUsing the telephone in critical areas Accessories Remote controlChanger HandsetKeyCard and SIM card Basic informationStarting up the Radiophone Second KeyCard/SIM cardRemoving the KeyCard/SIM card Train KeyCard/SIM cardsSelecting the language for the display Never forcibly pull out the card! You may destroy itDSC learn mode Displaying the radio pass dataOptical warning of anti-theft protection Care of your KeyCard/SIM-CardOn/off Volume Switching the unit on/off with the KeyCardSwitching the unit on/off via the ig- nition Switching the radio on when the ig- nition is switched offSRC Source TS / BNDCassette loading slot Storing radio stationsRecalling stored radio stations -Se AF / #= MIX DisplayRadio operation a Cassette operation Changer operation optionalStop this function by pressing or the opposite button Tape operationFlashing card tongue Additional rocker switch functions Additional settings possible with AUDDSC mode C Corresponding function must be activatedAudio mode AF Alternative FrequencyREG regional programme Radio, tape deck, CD changer optional, auxiliary sourceStation tuning Seek tuningManual tuning with Selecting a wavebandScrolling through the broadcast- ing networks FM only Storing radio stationsRecalling stored radio stations Selecting the seek-tuning sensi- tivitySwitching from stereo to mono FM only Switching traffic announcement priority on/off Automatic seek tuning startSwitching off the beep tone Traffic programme station reception with RDS-EONOperating the cassette deck Care instructions Tape equalisationDolby B NR Selecting the CD and the track Switching CD changer operation onCD changer operation optional Cancel SelectAlter StoreLoud 1 minimum boost Loud 6 maximum boost To make a note of the new codeTone setting for voice programs ranges between Level 0 Music/voice is switched offRAD. Monitor Radio Monitor With this function you can deterRemove menu items All of the menu items are availa- ble You can choose among the fol- lowing operating modesOverview of the DSC default settings End DSC programming/save changesPage Telephone operation Operating the telephone PIN codeInserting the SIM card/ entering your PIN code Reactivating the SIM cardDo not hang up until you are told to do so Making your first telephone callGSM emergency calls Quick reference for using the telephone VolumeOn/Off Selection buttonsEnter PIN code Network search Setup menu/Call menu To switch back to the telephone mode Press brieflyDisplays Radio menu Telephone-book menu@ Rocker switch Using the telephone Switching to telephone modeGSM network service area Dialling a telephone numberRedial function Broker’s call/hold Answering/ending a callCall waiting 2nd caller Conference calls Making telephone calls using the handset special accessorySetting up a conference call Phone book menu 103How to enter a name/text Finding an entry by name Check capacity Prevent accessShow my phone number Altering, deleting, moving or copying the entry Add entryFinding an entry by position Press CL, the altered setting will not be stored Programming with DSC TelephoneStore/confirm End DSC109 Programming in the setup menuSelect the setup menu by pressing Ringing tone volume Hands-free volume Automatic answerAutomatic redial Operating mode Handset volumeRinging tone SMS toneMy phone number Call meter formatSet charge parameters Audible call timerPIN code Alter access code Following settings will be deletedExternal alarm Be sure to make a note of the new code if you change itOverview of the basic factory settings in the set-up menu Hands-free channelHands-free operation is possible on all four channels TA during call115 Press CL, the new setting will not be storedProgramming in the Call Menu Call mailbox Received SMS messages Selecting the messageReading messages Clearing messagesCalling the sender or another telephone Sending SMS messagesNetwork selection Cell Broadcast Which operates in numbered channelsSages Available channels from your network OperatorCall barring Call metersCall forwarding Phone lock You can only call the one-touch dialOne-touch dial only To 9 and the SIM card Speed/touch dial onlyOverview of the basic factory settings in the call menu Closed user groupGlossary Specifications TunerTelephone Tape deckBlaupunkt telephone help line 01 80 / 5 25 56Bosch Gruppe