Quick reference for using the telephone
1On/Off
The set must be switched on before it is possible to use the telephone.
Volume
Adjusts the volume while using the
Adjusts the TA volume while using the
Adjusts the volume of the current ring tone.
Remote control
3SRC (Source)
Press SRC briefly: The telephone functions will end and the set will auto- matically switch back to the audio mode used last (radio, tape deck or optional CD changer).
The telephone mode has priority. It is not possible to switch to an audio mode if you are already talking on the telephone or trying to place a call.
If you press SRC briefly while the tele- phone is ringing: the caller will receive the information that the party he is call- ing is unavailable.
Press SRC for approx. 1 second: busy signal.
9Selection buttons
To enter a telephone number:
Press the corresponding keys briefly.
To use
Press the corresponding key for ap- prox. 2 seconds.
To use
Press *, then press the corresponding key for approx. 2 seconds.
Enter the name. Please refer to the section on “How to enter a name/text”.
The functions described under “Vol- ume” can be altered by pressing
V+.
2 / AUD
If this button is pressed while the tele- phone is in use, the microphone will be muted. This makes it possible to con- duct a conversation in your vehicle while the party on the telephone is un- able to listen.
4TA (Traffic Announcement = Priority for traffic announcements)
To switch off the priority for traffic an- nouncements during a telephone call: Press TA during the telephone call.
5TS / BND
To switch from handset operation to the
Press BND and replace handset.
To answer a call: Press one of the but- tons on the right side of the set.
:AF / #
Enters special characters.
96