Blaupunkt TCM 127 Alter access code, Be sure to make a note of the new code if you change it

Page 51

Alter access code

Use the access code to gain access to the important menu items.

This code is set to “0000” at the factory.

Be sure to make a note of the new code if you change it.

Enter the old code (in this case “0000”) and press OK.

Enter the new code, press OK. Enter the new code again and press OK again.

Master clear

Using this menu item you can delete the telephone settings.

You can also delete the SIM card settings. Please be careful when using this function!

The following settings will be deleted:

a)Phone

Speed-dial directory Call charges setting Call counter

b)SIM card Speed-dial directory Redial memory Own phone numbers Mailbox numbers SMS messages

AOC

Fixed telephone numbers Preferred networks Preferred language.

If this menu item is selected, you will be re- quired to enter the access code after press- ing OK. Enter the access code, press OK.

Then select “Card” or “Phone” by pressing

<</ >>.

“Clear phone memory?” or “Clear card?” will appear in the display.

Press CL if you want to cancel the process.

Do not press OK unless you want to do a “Master clear”, “cleared” will appear in the display.

The process has been completed when “Master clear” appears in the display.

External alarm

If the ignition is switched off, you can have an incoming call signalled by the car’s horn or flashing lights in addition to the ringing in the car.

For this to operate, you must first

press << / >> to switch the function “External alarm” to ON in the DSC menu.

Switch off the unit with the ignition and switch it on again by pressing the ON button.

If an incoming call is detected, the external alarm will sound five times in succession.

To protect the vehicle’s battery power, the unit will switch off automatically after one hour.

If necessary you can switch on the external alarm again for one hour by pressing the ON button.

Refer to the installation instructions for con- nections and accessories.

RadioDEUTSCH

ENGLISHTelefon

TelephoneRadio

113

Image 51

Contents Amsterdam TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone General information Safety standardsSafety information Important informationInstallation Using the telephone in critical areasEmergency calls Handset AccessoriesRemote control ChangerSecond KeyCard/SIM card KeyCard and SIM cardBasic information Starting up the RadiophoneNever forcibly pull out the card! You may destroy it Removing the KeyCard/SIM cardTrain KeyCard/SIM cards Selecting the language for the displayCare of your KeyCard/SIM-Card DSC learn modeDisplaying the radio pass data Optical warning of anti-theft protectionSwitching the radio on when the ig- nition is switched off On/off VolumeSwitching the unit on/off with the KeyCard Switching the unit on/off via the ig- nitionTS / BND SRC SourceAF / # Cassette loading slotStoring radio stations Recalling stored radio stations -SeCassette operation Changer operation optional = MIXDisplay Radio operation aTape operation Flashing card tongueStop this function by pressing or the opposite button Corresponding function must be activated Additional rocker switch functionsAdditional settings possible with AUD DSC mode CRadio, tape deck, CD changer optional, auxiliary source Audio modeAF Alternative Frequency REG regional programmeSelecting a waveband Station tuningSeek tuning Manual tuning withStoring radio stations Scrolling through the broadcast- ing networks FM onlySelecting the seek-tuning sensi- tivity Switching from stereo to mono FM onlyRecalling stored radio stations Traffic programme station reception with RDS-EON Switching traffic announcement priority on/offAutomatic seek tuning start Switching off the beep toneOperating the cassette deck Tape equalisation Dolby B NRCare instructions Switching CD changer operation on CD changer operation optionalSelecting the CD and the track Store CancelSelect AlterTo make a note of the new code Loud 1 minimum boost Loud 6 maximum boostWith this function you can deter Tone setting for voice programs ranges between Level 0Music/voice is switched off RAD. Monitor Radio MonitorYou can choose among the fol- lowing operating modes Remove menu items All of the menu items are availa- bleEnd DSC programming/save changes Overview of the DSC default settingsPage Telephone operation Reactivating the SIM card Operating the telephonePIN code Inserting the SIM card/ entering your PIN codeMaking your first telephone call GSM emergency callsDo not hang up until you are told to do so Selection buttons Quick reference for using the telephoneVolume On/OffTelephone-book menu Enter PIN code Network search Setup menu/Call menuTo switch back to the telephone mode Press briefly Displays Radio menu@ Rocker switch Dialling a telephone number Using the telephoneSwitching to telephone mode GSM network service areaRedial function Answering/ending a call Call waiting 2nd callerBroker’s call/hold Making telephone calls using the handset special accessory Setting up a conference callConference calls 103 Phone book menuHow to enter a name/text Finding an entry by name Prevent access Show my phone numberCheck capacity Add entry Finding an entry by positionAltering, deleting, moving or copying the entry End DSC Press CL, the altered setting will not be storedProgramming with DSC Telephone Store/confirmProgramming in the setup menu Select the setup menu by pressing109 Handset volume Ringing tone volumeHands-free volume Automatic answer Automatic redial Operating modeCall meter format Ringing toneSMS tone My phone numberAudible call timer PIN codeSet charge parameters Be sure to make a note of the new code if you change it Alter access codeFollowing settings will be deleted External alarmTA during call Overview of the basic factory settings in the set-up menuHands-free channel Hands-free operation is possible on all four channelsPress CL, the new setting will not be stored Programming in the Call Menu115 Clearing messages Call mailbox Received SMS messagesSelecting the message Reading messagesSending SMS messages Calling the sender or another telephoneNetwork selection Available channels from your network Operator Cell BroadcastWhich operates in numbered channels SagesCall meters Call forwardingCall barring To 9 and the SIM card Speed/touch dial only Phone lockYou can only call the one-touch dial One-touch dial onlyClosed user group Overview of the basic factory settings in the call menuGlossary Tape deck SpecificationsTuner Telephone01 80 / 5 25 56 Blaupunkt telephone help lineBosch Gruppe