Blaupunkt TCM 127 Ringing tone volume, Hands-free volume Automatic answer, Handset volume

Page 48

Ringing tone volume

Press << / >> to adjust the volume of the ringing tone from between 0 and 9. 0 = off.

If the automatic answer function is switched on, the volume cannot be set to “0”.

Hands-free volume

Automatic answer

The telephone will automatically answer in- coming calls if you press << / >> to select “On” for this menu item.

The call will be set to hands-free operation automatically.

In this case, do not set the ringing tone vol- ume to “0”.

Automatic redial

Operating mode

If this menu item is selected, you will be re- quired to enter the access code after press- ing OK.

Then select the operating mode by press- ing << / >>:

Standard	–	all operating modes
Radio only	– no telephone, all other
		operating modes
Phone only	–	telephone mode only

Press << / >> to adjust the volume of the incoming call from 0 to 63 over the car speakers.

Handset volume

This menu item will not appear unless a Blaupunkt handset has been connected to the system.

Press << / >> to adjust the volume of the handset to one of three levels (low, medi- um, high), remove the handset from the cra- dle first.

If the busy signal is received, an outgoing call will be redialled automatically if you press << / >> to select “On” for this menu item.

You can stop the automatic redial by press- ing the telephone button.

Off – redial is switched off

On – redial is switched on.

The number of times the telephone will at- tempt to redial depends on the network used.

Extended menu

Use this function to remove the following menu items from the display in the setup menu by pressing << / >>. These items are seldom used.

This makes the setup menu more clear.

Off – menu items removed from display

On – all of the menu items are available.

110

Image 48

Contents Amsterdam TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Safety standards Safety informationImportant information General informationInstallation Using the telephone in critical areasEmergency calls Accessories Remote controlChanger HandsetKeyCard and SIM card Basic informationStarting up the Radiophone Second KeyCard/SIM cardRemoving the KeyCard/SIM card Train KeyCard/SIM cardsSelecting the language for the display Never forcibly pull out the card! You may destroy itDSC learn mode Displaying the radio pass dataOptical warning of anti-theft protection Care of your KeyCard/SIM-CardOn/off Volume Switching the unit on/off with the KeyCardSwitching the unit on/off via the ig- nition Switching the radio on when the ig- nition is switched offSRC Source TS / BNDCassette loading slot Storing radio stationsRecalling stored radio stations -Se AF / #= MIX DisplayRadio operation a Cassette operation Changer operation optionalTape operation Flashing card tongueStop this function by pressing or the opposite button Additional rocker switch functions Additional settings possible with AUDDSC mode C Corresponding function must be activatedAudio mode AF Alternative FrequencyREG regional programme Radio, tape deck, CD changer optional, auxiliary sourceStation tuning Seek tuningManual tuning with Selecting a wavebandScrolling through the broadcast- ing networks FM only Storing radio stationsSelecting the seek-tuning sensi- tivity Switching from stereo to mono FM onlyRecalling stored radio stations Switching traffic announcement priority on/off Automatic seek tuning startSwitching off the beep tone Traffic programme station reception with RDS-EONOperating the cassette deck Tape equalisation Dolby B NRCare instructions Switching CD changer operation on CD changer operation optionalSelecting the CD and the track Cancel SelectAlter StoreLoud 1 minimum boost Loud 6 maximum boost To make a note of the new codeTone setting for voice programs ranges between Level 0 Music/voice is switched offRAD. Monitor Radio Monitor With this function you can deterRemove menu items All of the menu items are availa- ble You can choose among the fol- lowing operating modesOverview of the DSC default settings End DSC programming/save changesPage Telephone operation Operating the telephone PIN codeInserting the SIM card/ entering your PIN code Reactivating the SIM cardMaking your first telephone call GSM emergency callsDo not hang up until you are told to do so Quick reference for using the telephone VolumeOn/Off Selection buttonsEnter PIN code Network search Setup menu/Call menu To switch back to the telephone mode Press brieflyDisplays Radio menu Telephone-book menu@ Rocker switch Using the telephone Switching to telephone modeGSM network service area Dialling a telephone numberRedial function Answering/ending a call Call waiting 2nd callerBroker’s call/hold Making telephone calls using the handset special accessory Setting up a conference callConference calls Phone book menu 103How to enter a name/text Finding an entry by name Prevent access Show my phone numberCheck capacity Add entry Finding an entry by positionAltering, deleting, moving or copying the entry Press CL, the altered setting will not be stored Programming with DSC TelephoneStore/confirm End DSCProgramming in the setup menu Select the setup menu by pressing109 Ringing tone volume Hands-free volume Automatic answerAutomatic redial Operating mode Handset volumeRinging tone SMS toneMy phone number Call meter formatAudible call timer PIN codeSet charge parameters Alter access code Following settings will be deletedExternal alarm Be sure to make a note of the new code if you change itOverview of the basic factory settings in the set-up menu Hands-free channelHands-free operation is possible on all four channels TA during callPress CL, the new setting will not be stored Programming in the Call Menu115 Call mailbox Received SMS messages Selecting the messageReading messages Clearing messagesCalling the sender or another telephone Sending SMS messagesNetwork selection Cell Broadcast Which operates in numbered channelsSages Available channels from your network OperatorCall meters Call forwardingCall barring Phone lock You can only call the one-touch dialOne-touch dial only To 9 and the SIM card Speed/touch dial onlyOverview of the basic factory settings in the call menu Closed user groupGlossary Specifications TunerTelephone Tape deckBlaupunkt telephone help line 01 80 / 5 25 56Bosch Gruppe