Blaupunkt TCM 127 operating instructions Removing the KeyCard/SIM card, Train KeyCard/SIM cards

Page 9

Selecting the language for the display

At the factory the texts for the display are set to English.

You can display the texts in other languag- es if you wish.

•Press DSC/OK.

•Press / until “LANGUAGE” appears in the display.

•Press DSC/OK and << / >> to select the language.

•Press DSC/OK and CL one after the other.

Removing the KeyCard/SIM card

Never forcibly pull out the card! You may destroy it.

•First push the card in gently towards the unit.

The KeyCard/SIM card will eject slightly so that you can remove it.

•Remove the card.

When you remove the card for the first time, “LEARN CARD” will appear in the display. Now you can train additional cards (refer to “Train SIM cards”).

After this process has ended, the Radio- phone will switch off when the card has been removed.

Train KeyCard/SIM cards

In the initial programming process you can easily train the second KeyCard and up to 30 SIM cards.

In order to do this the Radiophone must be switched on and the original KeyCard insert- ed.

•Remove the original KeyCard and in- sert the first SIM card.

“NAME?“ will appear in the display.

If you like, you can enter a name of up to 8 characters. Please refer to “How to enter a name/text”.

If you would like to skip this function or after you have entered the name:

•Press OK.

The first SIM card has been programmed. “TERMINATE? PRESS OK” will appear in the display. Now you can programme addi- tional cards.

To finish the programming process:

•Press OK.

The SIM card trained first assumes the ad- ditional function of master SIM card. Other SIM cards can only be trained using either the master SIM card or the KeyCard.

There are two basic ways in which you can train other SIM cards:

a)Training or deleting the KeyCard/ SIM card with DSC

DSC – LEARN CARD

One KeyCard or up to 30 SIM cards can be trained or replaced as addition- al cards.

•Insert the first KeyCard (included with the Radiophone) into the unit and switch the unit on.

•Press DSC/OK and press / to select “LEARN CARD”.

•Press DSC/OK briefly.

“CHANGE CARD” will appear in the display.

•Remove the first KeyCard and in- sert the new card (KeyCard or SIM card).

After insertion of a SIM card only: The display shows “NAME?”.

If you wish, you can now enter a name of up to 8 characters.

If necessary, refer to the section on “How to enter a name/text”.

•Press DSC/OK.

•Enter the PIN code and press DSC/ OK.

After “CODE OK”, the display will show, for example, “SIM CARD 23 AC-

RadioDEUTSCH

ENGLISHTelefon

TelephoneRadio

71

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Amsterdam TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Safety information Safety standardsImportant information General informationInstallation Using the telephone in critical areasEmergency calls Remote control AccessoriesChanger HandsetBasic information KeyCard and SIM cardStarting up the Radiophone Second KeyCard/SIM cardTrain KeyCard/SIM cards Removing the KeyCard/SIM cardSelecting the language for the display Never forcibly pull out the card! You may destroy itDisplaying the radio pass data DSC learn modeOptical warning of anti-theft protection Care of your KeyCard/SIM-CardSwitching the unit on/off with the KeyCard On/off VolumeSwitching the unit on/off via the ig- nition Switching the radio on when the ig- nition is switched offTS / BND SRC SourceStoring radio stations Cassette loading slotRecalling stored radio stations -Se AF / #Display = MIXRadio operation a Cassette operation Changer operation optionalTape operation Flashing card tongueStop this function by pressing or the opposite button Additional settings possible with AUD Additional rocker switch functionsDSC mode C Corresponding function must be activatedAF Alternative Frequency Audio modeREG regional programme Radio, tape deck, CD changer optional, auxiliary sourceSeek tuning Station tuningManual tuning with Selecting a wavebandStoring radio stations Scrolling through the broadcast- ing networks FM onlySelecting the seek-tuning sensi- tivity Switching from stereo to mono FM onlyRecalling stored radio stations Automatic seek tuning start Switching traffic announcement priority on/offSwitching off the beep tone Traffic programme station reception with RDS-EONOperating the cassette deck Tape equalisation Dolby B NRCare instructions Switching CD changer operation on CD changer operation optionalSelecting the CD and the track Select CancelAlter StoreTo make a note of the new code Loud 1 minimum boost Loud 6 maximum boostMusic/voice is switched off Tone setting for voice programs ranges between Level 0RAD. Monitor Radio Monitor With this function you can deterYou can choose among the fol- lowing operating modes Remove menu items All of the menu items are availa- bleEnd DSC programming/save changes Overview of the DSC default settingsPage Telephone operation PIN code Operating the telephoneInserting the SIM card/ entering your PIN code Reactivating the SIM cardMaking your first telephone call GSM emergency callsDo not hang up until you are told to do so Volume Quick reference for using the telephoneOn/Off Selection buttonsTo switch back to the telephone mode Press briefly Enter PIN code Network search Setup menu/Call menuDisplays Radio menu Telephone-book menu@ Rocker switch Switching to telephone mode Using the telephoneGSM network service area Dialling a telephone numberRedial function Answering/ending a call Call waiting 2nd callerBroker’s call/hold Making telephone calls using the handset special accessory Setting up a conference callConference calls 103 Phone book menuHow to enter a name/text Finding an entry by name Prevent access Show my phone numberCheck capacity Add entry Finding an entry by positionAltering, deleting, moving or copying the entry Programming with DSC Telephone Press CL, the altered setting will not be storedStore/confirm End DSCProgramming in the setup menu Select the setup menu by pressing109 Hands-free volume Automatic answer Ringing tone volumeAutomatic redial Operating mode Handset volumeSMS tone Ringing toneMy phone number Call meter formatAudible call timer PIN codeSet charge parameters Following settings will be deleted Alter access codeExternal alarm Be sure to make a note of the new code if you change itHands-free channel Overview of the basic factory settings in the set-up menuHands-free operation is possible on all four channels TA during callPress CL, the new setting will not be stored Programming in the Call Menu115 Selecting the message Call mailbox Received SMS messagesReading messages Clearing messagesSending SMS messages Calling the sender or another telephoneNetwork selection Which operates in numbered channels Cell BroadcastSages Available channels from your network OperatorCall meters Call forwardingCall barring You can only call the one-touch dial Phone lockOne-touch dial only To 9 and the SIM card Speed/touch dial onlyClosed user group Overview of the basic factory settings in the call menuGlossary Tuner SpecificationsTelephone Tape deck01 80 / 5 25 56 Blaupunkt telephone help lineBosch Gruppe
Top Page Image Contents