UMP9020
TAPE PLAYER OPERATION
23Cassette Door/Insert
To access the cassette door, located behind the front panel, press the TAPE OPEN CLOSE button (23). The front panel will open and fold down to the horizontal position, allowing room to insert a cassette into the player. To insert a cassette, hold the cassette with the exposed tape edge of the side to be played to the right and insert it fully into the cassette door. As the cassette is engaged and begins playing, “TAPE” appears on the display panel accompanied by the tape symbol ( 
). Direction of play is indicated by an animated curser which moves in a square pattern.
rewind (
) button is pressed while the tape is moving from right to left, the tape rewinds. To stop fast tape movement, lightly push the opposite button. If the tape is allowed to fast- forward or rewind all the way to the end, play automatically starts from the beginning.
25Tape Program Selector
To manually reverse tape direction and play the other side of the cassette, lightly push both the
26Tape Eject Button
To stop tape playback and eject the tape, press the tape eject 
button (26), located behind the front panel. If the button is not visible, press the TAPE OPEN CLOSE button (23) to release the front panel and lower it to the horizontal position. Radio operation resumes when the cassette is ejected.
NOTE: To avoid damage to the cassette or radio, remove the cassette when not in use.
Clockwise rotation indicates
25Fast-Forward/Rewind Buttons
The fast forward and rewind buttons cause the tape to move rapidly in the direction indicated by the arrows. If the 
) button is pushed when the tape is moving from left to right, the tape quickly advances forward. If the
| 24 |
26 | 25 |
| |
| 14 |