UMP9020
SPECIFICATIONS
CD-R and CD-RW Capability
Depending on media type and method of "recording/burning", some
ROXIOTM or NEROTM burning software.
In addition, this unit will only recognize the CDDA (Compact Disc Digital Audio), .MP3 and
.WMA formats "recorded / burned" onto a CD- R/RW. This unit does not support .WAV, .OGG or other formats.
Technical Specifications | AM Tuner |
| Tuning Range: 530kHz - 1710kHz |
| Sensitivity @ 20dB Signal to Noise: 30uV |
| Frequency Response: 30Hz - 2kHz, |
General
Power Supply: 11 to 16VDC, negative ground
Fuses: Battery - 15 amp/ATO, Ignition/ Accessory - 0.5 amp AGC
20 pin
Double Din Chassis Dimensions: 4”H x 7”W x 7”D (102mm x 178mm x 178mm)
Specifications subject to change without notice.
CEA Power Ratings
Power Output: 13 watts RMS X 4 channels into
Signal to Noise Ratio: 70dBA below reference.
(Reference: 1 watt,
Frequency Response: 20Hz to 20kHz,
Reference Supply Voltage: 14.4VDC
CD Player
Signal to Noise Ratio: >75dBA
Frequency Response: 20Hz to 18kHz,
Channel Separation: > 55dB @ 1kHz
D/A converter: 1Bit/Ch
FM Tuner
Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity: 18dBf
50dB Stereo Quieting Sensitivity: 20dBf
Stereo Separation @ 1kHz: >30dB
Frequency Response: 30Hz to 12kHz,
18