Sony XR-2753 Maintenance, Removing the unit, Fuse Replacement, Cassette care

Notes on Cassettes

Cassette care

∙Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads.

∙Keep cassettes away from equipment with built-in magnets such as speakers and amplifiers, as erasure or distortion on the recorded tape could occur.

∙Do not expose cassettes to direct sunlight, extremely cold temperatures or moisture.

∙Slack in the tape may cause the tape to be caught in the machine. Before you insert the tape, use a pencil or similar object to turn the reel and take up any slack.

Slack

EN	∙ Distorted cassettes and loose labels can cause
	problems when inserting or ejecting tapes.
	Remove or replace loose labels.

Maintenance

Fuse Replacement

When replacing the fuse, be sure to use one with the correct amperage which is stated on the fuse case. Never use a fuse whose amperage rating exceeds the one supplied to the unit as this could cause a malfunction of the unit.

Warning

Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.

Removing the unit

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is not recommended except for long continuous play. The tapes used for these cassettes are very thin and tend to be stretched easily. Frequent playing and stopping of these tapes may cause them to be pulled into the cassette deck mechanism.

To prevent the unit from being stolen When you leave your car, remove the unit from the bracket and take it away with you.

Caution

Be careful when you remove the unit. The rear of the unit becomes very hot just after operating it because of a built-in power amplifier.

8

Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)