Parrot Guide to Connecting Your Hands-Free Kit and Installation for 3200 Models
Page 11

Kit contents

•Colour LCD screen

•Installation cable

•Electronic control unit

•Directions for use

•Fitting accessories

FITTING

First of all, choose the place for the colour screen inside your vehicle. We would advise you to fit it in the centre of the dashboard

or near you.

Make sure that you can view the screen at a good angle and that it does not obstruct your view of the road. Once the hands-free kit is fully installed and switched on, you can adjust the screen’s brightness.

The installation cable is fitted with ISO connectors, as well as two line-out jacks for connecting to the car stereo’s line-in jacks if applicable.

Car stereo with line-in jacks:

Use this type of connection by wiring the brown and white wires

(or red and black) to the car stereo’s line-in jack and the yellow wire to the car stereo’s mute jack.

Car stereo with ISO connectors:

Disconnect the ISO connectors from your car stereo. Join the male ISO connectors of the kit’s cable to the car stereo. Join the vehicle’s ISO connectors to the female ISO connectors of the kit’s cable.

If the car stereo features a mute in jack, connect the yellow wire of the kit’s cable to the corresponding «mute in» jack (Mute in 1, 2 or 3).

Car stereo without ISO connectors:

An adapter cable is required to convert the specific connections into an ISO connector. As a result, installation will be the same as with an ISO connector. Parrot offers a range of ISO adapter cables. Visit our website at www.parrot.com.

Fitting the kit’s cable:

Check the wiring diagram for the car stereo’s ISO cable.

The red wire of the kit’s cable must be connected to the constant 12V supply, the orange wire to the ignition 12V and the black wire to ground. On some vehicles, the red and orange wires may need to be reversed. This can easily be done by reversing the two fuse holders.

On other vehicles, the ignition 12V may be missing from the car stereo’s connectors, meaning that you must connect the orange wire directly

to an available ignition 12V source in the vehicle.

Do not connect the orange wire to the constant 12V supply, as you could run down the vehicle’s battery.

Checking the installation:

If your Parrot 3200 LS-COLOR PLUS is correctly fitted, you should see the message «Goodbye» on the screen when you switch off your car’s ignition.

English

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Hands-free Car Kit Parrot 3200 LS-COLOR Plus General Information Declaration of Conformity Safety InformationProtection and personal safety FCC Compliance StatementRegistered trademarks General informationData security CopyrightsParrot 3200 LS-COLOR Plus Bluetooth QD ID B012189English Contents Page Introduction Fitting Kit contentsUsing ISO connectors Using line-in jacksInstalling Parrot 3200 LS-COLOR Plus screen Using for the first time Pairing with Your Mobile PhoneYou to manage your message FeaturesRemove the Parrot 3200LS-COLOR PLUS display Parrot 3200 LS-COLOR Plus MENusCalls Accessing the MenusTo the hands-free kit PhonebookVoice Recognition SettingsYour normal driving position Information UpdateHotline Automatic answerDeutsch Spracherkennung Zugriff auf die menüsEinstellung Page Ihre Hände bleiben dabei am Steuer EinführungAutoradio mit Eingängen «line in» InstallatiePrüfung der Installation VerpackungsinhaltMikrofon Line out Line + White Line Brown Not used Important remember to remove your screen when Installation des Displays Der Parrot 3200 LS-COLOR PlusDes Displays vorn am Armaturenbrett Um Diebstahl und längere Sonneneinstrahlung zu vermeidenErste Verwendung Kopplung MIT DEM TelefonEntnahme des Displays Der Parrot 3200 LS-COLOR Plus FunctiesMenu Anrufliste Zugriff AUF DIE MenüsTelefonbuch Spracherkennung EinstellungSprache Das gewünschte Niveau einGekoppelte Geräte Koppeln mit GerätInfos AktualisierungAutomatische Antwort Svenska Röstigenkänning InstallationVisa menyerna PreferenserPage Inledning », «Mute in 2» eller «Mute in 3» InstallationKontrollera kopplingsschemat för bilradions ISO-kablar Innehall I Förpackningen ingarAnvändning av «Line»-ingång Användning av ISO-anslutningar Leaving the vehicle to avoid tempting any would be Installation av skärmen För Parrot 3200 LS-COLOR PlusDen första användningen Ihopparning MED DIN TelefonBorttagning av skärmen FunktionerMenyer Katalog Visa MenyernaRöstigenkänning PreferenserVisning Ihopparade apparaterAnpassa en telefon SpråkAutomatiskt svar UppdateringVår hotline står till din tjänst Dansk Stemmegenkendelse Adgang til menuerneIndstillnger Page Introduktion Mute-in 1, 2 eller Pakkens IndholdBrug af linjeindgangsstikket Brug af ISO-sti Vigtigt Montering af skærmen Parrot 3200 LS-COLOR PlusBrug første gang Sammenkobling MED MobiltelefonenAfmonter af skærmen MENuER Opkaldsoversigt Adgang TIL MenuerneTelefonliste Stemmegenkendelse IndstillingerVælg et sprog til menuerne på Parrot 3200 LS-COLOR Plus Automatisk svar OpdateringNorsk Talegjenkjennelse InstallasjonTilgang til menyene PreferanserPage Innledning Bilradio med «line in»-inntak InstallasjonKontroll av installasjonen Pakkens InnholdBruk av «Line»-inntak Bruk av ISO-kontakter Viktig Installasjon av Parrot 3200 LS-COLOR Plus displayFørste gangs bruk Paring MED DIN TelefonTa ut displayet FunksjonerMenyer Anropsjournal Tilgang TIL MenyeneTelefonbok Talegjenkjennelse PreferanserLyd Apparater som er paretForeta paring av en telefon Informasjon OppgraderingVår hot-line står til din rådighet Page Page Page FCC ID RKXCK3200PLUS
Top Page Image Contents