Smooth Fitness FX20HR user manual Maintenance, How to maintain your treadmill, Belt Adjustment

Page 26

26

FX20HR MOTORIZED TREADMILL

MAINTENANCE

How to maintain your treadmill:

Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper maintenance could cause damage or shorten the life of your treadmill.

•Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight.

•Inspect and tighten all parts of the treadmill regularly. Replace any worn parts immediately.

BELT ADJUSTMENT:

The running belt has been properly adjusted at the factory. However transportation, uneven flooring or other unpredicted reasons could cause the belt to shift off center resulting in the belt rubbing with the plastic side rail or end caps and possibly causing damage. To adjust the belt back to it’s proper position please follow the directions below:

1.If your belt tends to walk to the right, rotate the right tension bolt clockwise. We recommend adjustments of 1/4 turn at a time, and follow with a test. If your belt continues to walk to the right, simply adjust the left belt tension bolt by turning it 1/4 turn counterclockwise, and follow with a test.

2.If your belt tends to walk to the left, rotate the left tension bolt clockwise 1/4 turn at a time, and follow with a test. If the belt continues to walk to the left, simply adjust the right tension bolt counterclockwise.

3.If your belt appears to be loose, simply tighten both bolts evenly 1/4 turn. If it appears tight, simply loosen both bolts evenly 1/4 turn.

Right and left tension bolts are located at the rear of the treadmill.

DECK LUBRICATION:

The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be lubricated usually within the first year or 500 hours of use.

Every 30 days or 30 hours of operation lift the sides of the walking belt and feel the top surface of the walking board as far as you can reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow the instructions below.

Please use a non-petroleum based silicone.

Visit us at: www.evofitness.com

Page 25 Page 27
Image 26
Page 25 Page 27
Contents FX20HR Motorized Treadmill USER’S ManualPrecautions PrecautionsPower Requirements Power RequirementsPreassembly Description QTY Hardware Comparison ChartHardware chart MilimetersParts List Description QTY. Order noDescription QTY Order Parts Diagram Parts Diagram Assembly StepAssembly Assembly Assembly Assembly Assembly Folding Instructions Follow These Instructions to Fold UP Your TreadmillUnfolding Instructions Follow These Instructions to Unfold Your TreadmillHow to fold up the treadmill Transport InstructionsStop / Enter Computer OperationButton Functions Start Scan / HoldSleep / Display Mode Cool Down SET UP User InformationPAUSE/STOP Computer OperationProgram 3 Target Calories Program 6 Weight LostProgram 2 Target Distance Program 4 Interval InclineEdit Previous Saved Program C1 C3 Custom Program User ProgramSET and Save the User Program Strap chest belt across the front below the chest line How to use Motion Control Motion Control OperationBelt Adjustment MaintenanceHow to maintain your treadmill Deck LubricationCleaning To apply lubricant to the walking beltImportant Steps Before beginningAerobic exercise Target Heart RateFinding your pulse Muscle Chart Targeted muscle groupsToe Touch Stretching RoutineWarm up and cool down Shoulder LiftSide Stretch Hamstring StretchInner Thigh Stretch Calf-Achilles StretchTreadmill looses power during use TroubleshootingTroubleshooting Treadmill will not start Treadmill walking belt slows during use888.800.1167
Top Page Image Contents